Squeezed out a little time in the shop to build my personal 6.5 SAUM. I went a little different direction than a hunting rifle. I can see myself chambering up a hunting rifle!!
Barely 50 rounds down the pipe and I'm hooked! No recoil, and flat hammers!! Big thanks to George, Pat, Scott and everyone else involved in doing the leg work to be this going.
Specs-
Trued 700
PTG bolt with Sako extractor
Badger lug
M24 contour Krieger 1-8.5 @26"
Schuler brake
Jewell trigger
Badger 20 moa rail
PTG dbm with Alpha mags
Seekins rings
Bushnell G2DMR
Pillar and glass bedded in an old A4
Cerakote in graphite black
Shot of the rifle from today's "break in"...
First 4 down the pipe... 130 JLKs / 63 grns of H1000
With its near twin.. my 260 comp rig.
Barely 50 rounds down the pipe and I'm hooked! No recoil, and flat hammers!! Big thanks to George, Pat, Scott and everyone else involved in doing the leg work to be this going.
Specs-
Trued 700
PTG bolt with Sako extractor
Badger lug
M24 contour Krieger 1-8.5 @26"
Schuler brake
Jewell trigger
Badger 20 moa rail
PTG dbm with Alpha mags
Seekins rings
Bushnell G2DMR
Pillar and glass bedded in an old A4
Cerakote in graphite black
Shot of the rifle from today's "break in"...
First 4 down the pipe... 130 JLKs / 63 grns of H1000
With its near twin.. my 260 comp rig.