Anybody got any loads for this cartridge with the 140's? I know alot of people say 140's are to heavy but so far mine likes the 140 vld's. I just want to get the speed up. Right now I'm getting 2770. Any info would be greatly appreciated. TM
-
Having trouble using the site?
Contact support
Re: 6.5x47 with 140's
I plan to load some 140s for my upcoming Lapua build with a 22" barrel. I was offered the below loads from a guy with QuickLOAD.
Expect a 25-50 fps increase per extra inch of barrel. Also don't forget to reduce these charges by 5-7% to start.
Lastly, if your barrel is 24" or longer, don't forget to try RL 15, RL17, and H4350. I'm sorry, I can't help you with charge weights for these powders.
<div class="ubbcode-block"><div class="ubbcode-header">Quote:</div><div class="ubbcode-body">Berger 140 V [It is 1.399" long, boat tailed with a .197" base and .21" of taper, is all I know.] 22" barrel, no moly, 2.8" OAL, max pressure 72kpsi:
Jamming the bullet into the lands is like a 2 gr increase in powder, so don't have that as an out of control variable.
We are assuming a 3,600 psi start pressure in your quickload calcs.
Normally, 2k is off the lands and 5 k is into the lands, but you have a small bullet area, so 3.6k is what we are using.
H4895 38.5 gr 71,867 psi, 2755 fps, 101.7% fill ratio
N135 37.2 gr 71,995 psi, 2699 fps, 104.9% fill ratio
N140 39.4 gr 72,241 psi, 2739 fps, 104.8% fill ratio
Varget 38.6 gr 72,088 psi, 2776 fps, 101.9% case fill
</div></div>
I also found this in my collection of random comments from folks loading for the 6.5 Lapua;
<div class="ubbcode-block"><div class="ubbcode-header">Quote:</div><div class="ubbcode-body">I'm getting 2850 with the 139 Scenar, 43 grains of Ramshot Hunter, CCI 450 in the 6.5x47 Lapua. 25" 3 groove Lija.</div></div>
I plan to load some 140s for my upcoming Lapua build with a 22" barrel. I was offered the below loads from a guy with QuickLOAD.
Expect a 25-50 fps increase per extra inch of barrel. Also don't forget to reduce these charges by 5-7% to start.
Lastly, if your barrel is 24" or longer, don't forget to try RL 15, RL17, and H4350. I'm sorry, I can't help you with charge weights for these powders.
<div class="ubbcode-block"><div class="ubbcode-header">Quote:</div><div class="ubbcode-body">Berger 140 V [It is 1.399" long, boat tailed with a .197" base and .21" of taper, is all I know.] 22" barrel, no moly, 2.8" OAL, max pressure 72kpsi:
Jamming the bullet into the lands is like a 2 gr increase in powder, so don't have that as an out of control variable.
We are assuming a 3,600 psi start pressure in your quickload calcs.
Normally, 2k is off the lands and 5 k is into the lands, but you have a small bullet area, so 3.6k is what we are using.
H4895 38.5 gr 71,867 psi, 2755 fps, 101.7% fill ratio
N135 37.2 gr 71,995 psi, 2699 fps, 104.9% fill ratio
N140 39.4 gr 72,241 psi, 2739 fps, 104.8% fill ratio
Varget 38.6 gr 72,088 psi, 2776 fps, 101.9% case fill
</div></div>
I also found this in my collection of random comments from folks loading for the 6.5 Lapua;
<div class="ubbcode-block"><div class="ubbcode-header">Quote:</div><div class="ubbcode-body">I'm getting 2850 with the 139 Scenar, 43 grains of Ramshot Hunter, CCI 450 in the 6.5x47 Lapua. 25" 3 groove Lija.</div></div>
Re: 6.5x47 with 140's
.618BC at 2770fps is nothing to complain about.If it shoots good then enjoy.Go look at the 7mm08 thread and you will feel much better.
Steve
.618BC at 2770fps is nothing to complain about.If it shoots good then enjoy.Go look at the 7mm08 thread and you will feel much better.
Steve
