6mm 110gn ATIP jump

[acourvil]

Those of you shooting the 110 6mm ATips, what jump from the lands are you using? My particular use would be in a 6 Creedmoor, but I'm interested in other 6mms as well.

 

[abn31c]

30 jump for me. They don't seem to be to picky.

 

[tmcgowan1911]

6bra I was jumping 40k. Started at 20 but didn’t start tightening up until around 35.

 

[Longshot284]

I’m at .030”, but only by default. I tried .020” all the way out to .060” - saw no difference so I just stuck with .030”.

loading a 6 CM and a 6 ARC

 

[tmcgowan1911]

I would think your free bore would also make these numbers different for everyone. The free bore on my 6bra is .135. I think you need a little more free bore on these small 6mm’s with the Atips.

 

[30cal user]

Does anybody know the bearing surface for the a tip, 6mm 110?

 

[giumau1]

.070” here, freebore zero 2.270” cbto ( Hornady gauge) so I seat them at 2.2”, coal around 2.8 good for reliable mag feed for PRS.

 

[acourvil]

Thanks for the info. I’m setting up a new 6 Creed and this is helpful for deciding freebore.