6mm Creedmoor neck bushing size

[sig2009]

I'm replacing a 6.5 Creedmoor barrel with a 6mm Creedmoor barrel. I understand you can use the same 6.5mm sizing die. I use a Redding bushing die now. Planning to use Lapua 6mm Ceedmoor brass. What size neck bushings are you using with Lapua brass? I did just pick up a bunch of once fired brass and it measures .016 neck thickness.
. I will also be using a LE Wilson .242 mandrel as a final step.

 

[BigOldPhatboy]

My loaded Lapua cases measure approximatly .274 using a micrometer. My neck thickness measures closer to .015 measured with a ball micromerer. I usually subtract .003-.004 from the loaded round measurement. So for me I would go with a .270 bushing.