7mm reloading advice

[shipereyes445]

I have never handloaded/reloaded before. So, I know very little about the finer points of this art. So I am looking for some advice concerning a load work up for 7mm Rem Mag. The gun is Remington 700 Long Range, pretty much everything on it is stock, I do intend to do much work to it in the future, re-barrel, truing the action, etc. The barrel is only 1 in 9.5 twist, so it won't stabilize the heavier bullets, another point for rebarreling it in the future.

However right now I'm trying to build a load and I'm looking for some advice.

I have 140gr Nosler Accubonds, 160gr Nosler Accubonds, 150gr Nosler Accubonds Long Range, and 162gr Amax. I have RL 19 and RL 25 powders.

If anyone has suggestions for loads out of these components (or others not listed, particularly powders) I would really appreciate the advice, at least as a place to start or consider. Thanks for the assistance.

 

[cook1536]

You might poke around in the Reloading Depot room also, there is a lot of recipes in there. Alliants site load data page only gives you 1 load for the RL powders, they don't give you the min/max like some of the other powder companies data.

http://www.alliantpowder.com/resources/catalog/2018_Alliant_Powder.pdf

 

[spife7980]

https://load-data.nosler.com/load-data/7mm-remington-magnum/