-
Having trouble using the site?
Contact support
Range date with the new girl went well. I think I’ll have a second date with her tomorrow 
found some good nodes right where others found them so I’m gonna start the jump tests with the VLD’s. And do a ton of dry fire before hand because wow, it’s a whole different animal from the TT 2 stage diamonds I’m used to.
found some good nodes right where others found them so I’m gonna start the jump tests with the VLD’s. And do a ton of dry fire before hand because wow, it’s a whole different animal from the TT 2 stage diamonds I’m used to.
Range date with the new girl went well. I think I’ll have a second date with her tomorrow
Indoor??? Wtf is this bush league?
Indoor 100yd range that I have a membership at with a free Labrador, hell yeah. Makes load dev super easy. And I don’t have to freeze to death in the harsh Colorado winters
and it extends my shooting window to 8pm instead of 4pm or whenever it gets dark now
Indoor 100yd range that I have a membership at with a free Labrador, hell yeah. Makes load dev super easy. And I don’t have to freeze to death in the harsh Colorado winters
Sorry rechecked my notes...18.5-18.75" prolly to play it safe overall length would get you enough for wrench flats and .6ish muzzle threads...
I said screw it and just went back to my 20" win tac barrel
Thank you for your blessing good sir
Edited to add: I’m not cool enough for NV yet. I want to eventually get a PVS 30 or something cool for the AI lol
Last edited:
@Huskydriver what model of NVG are you running in the picture? I’m on my 3rd set of PVS 31’s and still they are garbage compared to that. Two out of the three have a honey comb and it drives me nuts.
View attachment 7440922
I haven’t seen it talked about in awhile, but while I had everything disassembled for my chassis conversion I swapped cross bolts out on my Spuhr. It’s a decent feature for A.I rifles because we always have a 4mm Allen on our person.
I called Mile High to get the specific size for my particular Spuhr, because there are 2 sizes, then I ordered the 4 bolts from bolt.com for less than $5 shipped.
Just wanted to bring the topic backup for some that haven’t thought about it.
Edit: I know it’s dirty, it’s always dirty
What is this scope mount ?
Is there a particular reason everyone uses Spuhr mounts on their AI? Besides the fact they are super rugged
I started looking on here right when I bought mine, a set sold like a day before I looked.
Lol
And everywhere is out of stock.
I am kinda struggling because I am not even sure what generation mine is.
The original owner bought it new a couple years ago, so it's an AIAT with removable barrel and pistol grip, but then he put on thumbhole skins that look awesome and look like an AWP from back in the day.
But since it's a different skin the folding stock pin doesn't hit the capture hole just right, and I don't know what generation of rifle to search for for replacement skins.
Is this a 1.5 AICS? A 2.0?
Lots of model specific data in the AI ecosystem to learn
Frank from Bartlein should be giving me a ring today. I think I’m just going with 19”. A member here offered to swap hand guards with me. The only problem for me is that his is black and mine is tan... so I gotta think about that.
Single handedly the best humble brag I've ever seen!
Anyone have one of these SKB cases from EuroOptic? I’ve looked high and low for what this circled compartment is cut for. Looks like a small pelican case or something, but no specs really match up. Euro’s stock image shows a bipod in there, but I don’t know why it’s shaped like a small case then.
Attachments
Haven't seen those at Euro. Like some of the other deployment cases, they contain a cut out for a small box to hold tools and such. That's likely what it was intended for.
Right. It just looks awfully specific to a certain case rather than just a square cut out. Here’s the pic that Euro shows.
It’s an extra spot for certain items in general I think that Bipod was too big to be left on the AI and still close the case and if the case could close it would leave the foam impressions on the top or could be just to have the other accessories that are stored that Bipod seems pretty big
Here's the kit from Remington with the case in a similar spot.
Take a look at @xXlojackXx picture. His bipod fits fine and if the butt stock can fold and fit in the case then the bipod certainly can.
Lol me either that’s why bullet gets the big bucks lolI never thought a case on its side like that. Back to searching with new dimensions
I thought it was the same as the comp trigger just the housing is a tad different to fit the axsr
Enjoy....
Accuracy International AXSR's are HERE!!
The adjustment procedure for the AXSR trigger is the same as for the comp trigger. It just won't go as low in total pull weight. The 308 bolts (and 300 WIN MAG) will be available in Q3. The limited edition ASR kits already have the 308 bolt. -Scott @Scott Seigmund any update on when the bolt...
www.snipershide.com
Accuracy International AXSR's are HERE!!
How about the magazines for short action cartridges....do those come out anytime soon or will it be in 2021?
www.snipershide.com
Enjoy....
Accuracy International AXSR's are HERE!!
The adjustment procedure for the AXSR trigger is the same as for the comp trigger. It just won't go as low in total pull weight. The 308 bolts (and 300 WIN MAG) will be available in Q3. The limited edition ASR kits already have the 308 bolt. -Scott @Scott Seigmund any update on when the bolt...
Accuracy International AXSR's are HERE!!
How about the magazines for short action cartridges....do those come out anytime soon or will it be in 2021?
thanks man. I wish they would have just put that it was adjustable in the owners manual but I gained some other knowledge as well considering I want a m-lok forend and my plan might not give well with MDT weights near the receiver end due to barrel OD and mlok screws touching the barrel.
@JB.IC @Huskydriver
So the triggers on the ASR/ AXSR is AI's vs the other comp trigger made by X-treme Shooting Products.
The housing on the AI trigger is a lot bigger. I tried messing with it a little as I prefer a heavier pull, but it didn't change much, so I kept it as is.
The ASR/ AXSR is held by roll pins. So not as easy to remove like what you see on older gen rifles with the 4mm screws. So maintenance on the trigger is more PITA as the trigger is held by roll pins vs 4mm screws in the older gen rifles. Also, you have to remove the action from the chassis to do so...
I like the reg AI triggers, but its prolly cause I'm used to it... MLOK is still gay... there's no need to buy weights if you just buy a heavier barrel
So the triggers on the ASR/ AXSR is AI's vs the other comp trigger made by X-treme Shooting Products.
The housing on the AI trigger is a lot bigger. I tried messing with it a little as I prefer a heavier pull, but it didn't change much, so I kept it as is.
The ASR/ AXSR is held by roll pins. So not as easy to remove like what you see on older gen rifles with the 4mm screws. So maintenance on the trigger is more PITA as the trigger is held by roll pins vs 4mm screws in the older gen rifles. Also, you have to remove the action from the chassis to do so...
I like the reg AI triggers, but its prolly cause I'm used to it... MLOK is still gay... there's no need to buy weights if you just buy a heavier barrel
I dunno what your missing other than they make both a fixed stock and a folder version of the AT
Guess I should of asked when I purchased it, I just assumed with the break in the stock it folded. First AI, 2012 AW.
You could find someone who did a Accuracy Obsession/AX stock swap if you wanted to make your AW a folder.
Like @tevan0707 said. It really shouldn’t be too big of a deal to make the swap if you want a folder.
either way you got a great rifle
Similar threads
