Adjustable 0.875 Gas Block Suggestions

[branson1369]

Anyone got a lead on a source for an adjustable 0.875 gas block? One of my best shooting buddies had a rifle built (not by me) and is struggling with timing. I corrected the buffer/spring issues funny how an AR 15 set just does not make for reliability in an AR 10. Now I just need to help him slow the bolt down a bit.

Thanks for any leads

 

[J Mack]

Re: Adjustable 0.875 Gas Block Suggestions

PRI makes this one.

PRI Low Profile Adjustable Gas Block: http://www.midwayusa.com/product/992168/...ter-steel-matte

 

[branson1369]

Re: Adjustable 0.875 Gas Block Suggestions

Thanks Google let me down ... damn technology

 

[DavidAR10]

Re: Adjustable 0.875 Gas Block Suggestions

Paladin Machine Services
3832 Gates Ford Road
Kershaw, SC 29067
(803) 475-7542

 

[Pusher591]

Re: Adjustable 0.875 Gas Block Suggestions

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: DavidAR10</div><div class="ubbcode-body">Paladin Machine Services
3832 Gates Ford Road
Kershaw, SC 29067
(803) 475-7542 </div></div>

+1 for Paladin. Dave, contact David Jordan. He might still have his, he was selling it because it wouldn't fit underneath the rail he was using, that's the only reason.

 

[bronco_buster]

Re: Adjustable 0.875 Gas Block Suggestions

I'm in the same boat.

A 0.875" clamp on adjustable gas block just does not exist.

 

[Pusher591]

Re: Adjustable 0.875 Gas Block Suggestions

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: bronco_buster</div><div class="ubbcode-body">I'm in the same boat.

A 0.875" clamp on adjustable gas block just does not exist. </div></div>

Yes it does, Paladin. He can make them for whatever diameter or gas tube length.

 

[GhostFace]

Re: Adjustable 0.875 Gas Block Suggestions

I second getting the PRI and I would order directly from them if not in stock at Midway or if you are LEO/ active duty MIL, they give a 10% discount. I had the Paladin but I have two issues with it. One, it's not adjustable, just full, 1/2 or off. The PRI is adjustable for fine tuning but does not have a complete off setting. Also the Paladin will need to be cleaned often to prevent it from locking up with carbon. Mine did and I was unable to get it unlock locked.

Plus I think the PRI looks better...

 

[fastex500]

Re: Adjustable 0.875 Gas Block Suggestions

Dave... I do still have mine, and it has the gas tube already trimmed and mounted. You are welcome to try it out.... just PM me