I found an adjustable cheek piece that fits on a rifle buffer tube. MDT makes a carbine skeleton stock. It looks like a pretty cool stock, but I'm just screwing together a lightweight model 7 & didn't want to put another $250 in it. I called and ordered the cheek piece for this stock and for $50 it was delivered in a few days. It fits on an Ace arfx as far forward as you wanna push it. This is pretty cool for a chassis rifle that takes an AR buffer tube. You can use a lightweight stock and still have a nice place for your ugly face.
Adjustable cheek piece fits buffer tube
- Thread starter Mr.Kirk
- Start date
This is mounted on an entry/ carbine length stock. Adjustment is smooth and can be locked at desired position with set screws. Pad is some kind of syntactic composite, so, may not want to coat the pad in h-series cerakote.
Attachments
Last edited:
Man thanks for sharing, that may be something I can put to use!
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Mr. Kirk, is there any way you could put a tape measure on your setup? I am trying to figure out if I can make this work on an AR with a rifle length Ace stock. Most interested in seeing what the width of the cheekpiece is.
Also, would be very interested to know what the height is from the top of the buffer tube to the top of the cheekpiece when it's at it's lowest level.
Any help would be greatly appreciated.
Also, would be very interested to know what the height is from the top of the buffer tube to the top of the cheekpiece when it's at it's lowest level.
Any help would be greatly appreciated.
