Advice on rings for glass

[jink122]

I have a remington 700 SPS 20" in 223. Sitting in an AICS 2.0 stock. I have the EGW 20moa base. I need rings.

I have a Falcon Menace 30mm and i'm wondering what to get? I have a budget of around $150 to spend. Also height recommendations? I'd like this to be QD if possible because I have another 700 in 308 sitting in a BnC stock that I want to swap form time to time.

Any advice is appreciated. Thank u.

 

[HillBilly_Sniper]

Re: Advice on rings for glass

Try the american defense mount a buddy has one seems really nice.


http://www.americandefensemanufacturing.com/view/product/11/

 

[jerseymike]

Re: Advice on rings for glass

Be aware a lot of qd mounts are really high since most of the time theyre put onto ar type rifles. So if u end up going qd youll most likely have to raise your comb

 

[roggom]

Re: Advice on rings for glass

If you are looking for rings in general, the Warne line are good-to-go. They are quality made and has a solid stainless steel recoil lug. There will be a bit of a gap on the top of the ring, but it is advantageous for checking elevation setting without raising your head (shooting prone). I was using Leupold PRW, but the Warne got my scope closer to the receiver.

By roggom at 2012-03-12

 

[G17C]

Re: Advice on rings for glass

I just tried a set of Seekins - very nice stuff. I used the low (.82") version on a Leupold Mk 4 base;

 

[roggom]

Re: Advice on rings for glass

G1 is that serial number shopped? If not that was a pretty unique find.

 

[G17C]

Re: Advice on rings for glass

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: roggom</div><div class="ubbcode-body">G1 is that serial number shopped? If not that was a pretty unique find. </div></div>

It is truly the wonders of Photoshop!