I am the original owner, all rounds have been recorded. This barrel is a hammer! I sold my AT so I have no use for it anymore.
-260 Remington AINA barrel (Dave Tooley Bartlein 1-8 twist)
-21.5” long
-muzzle is threaded 18X1.0 (TRG thread as that is what my direct thread suppressor is, but is large enough to turn down and thread to 5/8 X 24 as most use)
-the barrel has exactly 1000 rounds through it, so it’s not even at 1/2 life (I have never shot it fast or hard, no matches, just leisure slow fire at steel, and cleaned every 200~ rounds)
-it is superbly accurate with:
Lapua brass
either CCI BR-2 or GM210 primers
40.8g of Rl17
139g Scenar about 0.010” jump
This load is 2790 FPS
Targets seen below (disregard the bottom right group that was a factory 308 hunting rifle w/ a magneto speed attached) is 15 consecutive rounds including the cold bore (3 groups of 5 rounds) @ 100 yards shot 200 or 250 rounds ago.
-If your interested I also have a few hundred 139g Lapua Scenar's that this barrel loves. I would need to count them and we can figure out a price.
**barrel and thread protectors are sold pending funds**$350 shipped, insured, and tracked
**I added a few other items to the add for a package deal. So look at all the post after this first one.**
I would consider trades on:
-quality full length die set for 6.5X47 Lapua (like the Redding I have listed for the 260)
-123g Lapua Scenars
-maybe a 6.5 1-8 twist or faster barrel blank with a shank that will fit a TRG
-260 Remington AINA barrel (Dave Tooley Bartlein 1-8 twist)
-21.5” long
-muzzle is threaded 18X1.0 (TRG thread as that is what my direct thread suppressor is, but is large enough to turn down and thread to 5/8 X 24 as most use)
-the barrel has exactly 1000 rounds through it, so it’s not even at 1/2 life (I have never shot it fast or hard, no matches, just leisure slow fire at steel, and cleaned every 200~ rounds)
-it is superbly accurate with:
Lapua brass
either CCI BR-2 or GM210 primers
40.8g of Rl17
139g Scenar about 0.010” jump
This load is 2790 FPS
Targets seen below (disregard the bottom right group that was a factory 308 hunting rifle w/ a magneto speed attached) is 15 consecutive rounds including the cold bore (3 groups of 5 rounds) @ 100 yards shot 200 or 250 rounds ago.
-If your interested I also have a few hundred 139g Lapua Scenar's that this barrel loves. I would need to count them and we can figure out a price.
**barrel and thread protectors are sold pending funds**$350 shipped, insured, and tracked
**I added a few other items to the add for a package deal. So look at all the post after this first one.**
I would consider trades on:
-quality full length die set for 6.5X47 Lapua (like the Redding I have listed for the 260)
-123g Lapua Scenars
-maybe a 6.5 1-8 twist or faster barrel blank with a shank that will fit a TRG
Last edited:
