-
Having trouble using the site?
Contact support
ANYONE HAVE A LOAD FOR 110 VMAX IN 308
- Thread starter 308skinner
- Start date
Re: ANYONE HAVE A LOAD FOR 110 AMAX IN 308
You mean the 110 VMAX...
48.0 gr. Varget, Lapua Brass, 2.710" COAL, 3200 fps.
You mean the 110 VMAX...
48.0 gr. Varget, Lapua Brass, 2.710" COAL, 3200 fps.
Re: ANYONE HAVE A LOAD FOR 110 AMAX IN 308
Ya thats what i meant ill change that. Ill give it a shoot.
Ya thats what i meant ill change that. Ill give it a shoot.
Re: ANYONE HAVE A LOAD FOR 110 AMAX IN 308
308 Win
Factory 700 VS barrel, 20.5"
WW brass
CCI 200
110 VMax, Moly'd
2.75" OAL
AA2230C
52gr - 3190 fps
53gr - 3240 fps
54gr - 3290 fps
55gr - 3345 fps, slightly stick bolt
308 Win
Factory 700 VS barrel, 20.5"
WW brass
CCI 200
110 VMax, Moly'd
2.75" OAL
AA2230C
52gr - 3190 fps
53gr - 3240 fps
54gr - 3290 fps
55gr - 3345 fps, slightly stick bolt
Re: ANYONE HAVE A LOAD FOR 110 AMAX IN 308
Factory 700 VSSF 26", GMM brass, 49gr of AA2460 for 3300fps and great groups. I dont have oal but it was as long as possible while leaving enough shank in the neck.
Same set up squeezed 49gr of Varget for 3275fps but groups were eratic.
Factory 700 VSSF 26", GMM brass, 49gr of AA2460 for 3300fps and great groups. I dont have oal but it was as long as possible while leaving enough shank in the neck.
Same set up squeezed 49gr of Varget for 3275fps but groups were eratic.
Re: ANYONE HAVE A LOAD FOR 110 VMAX IN 308
range report 2009-01-29 308, 308, 308, 308, 35Whelen, 243
<div class="ubbcode-block"><div class="ubbcode-header">Quote:</div><div class="ubbcode-body">#4 rifle, British Parker Hale bull barrel 10.5 pounds plus scope [I put this $38 barrel on 5 years ago and never got around to shooting it], VZ24, Leupold VariX iii 13x40x40 target knobs
0.75" 3 shot group at 100 yards 110 gr
0.85" 3 shot group at 100 yards 110 gr
1.09" 3 shot group at 100 yards 110 gr
110 gr Vmax moly .308 LC or WW brass, 44.9 gr surplus bulk IMR4895 that acts more like H322, 2.815"
I have shot this before [2950 fps 22" barrel], and the reason that is all the powder I put in is because that is all that will fit in the military brass, the WW has room for another 4 gr. ~ 43kpsi </div></div>
That is a wimpy load, but nothing else shot that well that day.
range report 2009-01-29 308, 308, 308, 308, 35Whelen, 243
<div class="ubbcode-block"><div class="ubbcode-header">Quote:</div><div class="ubbcode-body">#4 rifle, British Parker Hale bull barrel 10.5 pounds plus scope [I put this $38 barrel on 5 years ago and never got around to shooting it], VZ24, Leupold VariX iii 13x40x40 target knobs
0.75" 3 shot group at 100 yards 110 gr
0.85" 3 shot group at 100 yards 110 gr
1.09" 3 shot group at 100 yards 110 gr
110 gr Vmax moly .308 LC or WW brass, 44.9 gr surplus bulk IMR4895 that acts more like H322, 2.815"
I have shot this before [2950 fps 22" barrel], and the reason that is all the powder I put in is because that is all that will fit in the military brass, the WW has room for another 4 gr. ~ 43kpsi </div></div>
That is a wimpy load, but nothing else shot that well that day.
Re: ANYONE HAVE A LOAD FOR 110 VMAX IN 308
Hopefully this isn't too much of a thread-jack.
Disregard the following. Explanation at the end...
Anyone have a reduced velocity load for this bullet? For those asking "Why?"....I've recently acquired a low quality night vision scope with really shitty eye relief and I'm trying to reduce the recoil to avoid "scope-eye" and to retain the target in the reticle through the recoil impulse.
The intended purpose of this load will be shooting coyotes at night at ranges not to exceed 100 yds. I figure if I can keep bullet energies above 1000 fpe, that should be plenty for 'yotes. All the starting loads that I've found are at velocities upwards of 3000 fps. I'm looking to *safely* attain velocities in the 2300-2400 fps range.
**ETA**
Problem solved. Rather than try and re-invent the wheel I'm gonna throw the night optic on my carbine length AR. Its been so long since I've shot it, I forgot it was in the safe.
Hopefully this isn't too much of a thread-jack.
Disregard the following. Explanation at the end...
Anyone have a reduced velocity load for this bullet? For those asking "Why?"....I've recently acquired a low quality night vision scope with really shitty eye relief and I'm trying to reduce the recoil to avoid "scope-eye" and to retain the target in the reticle through the recoil impulse.
The intended purpose of this load will be shooting coyotes at night at ranges not to exceed 100 yds. I figure if I can keep bullet energies above 1000 fpe, that should be plenty for 'yotes. All the starting loads that I've found are at velocities upwards of 3000 fps. I'm looking to *safely* attain velocities in the 2300-2400 fps range.
**ETA**
Problem solved. Rather than try and re-invent the wheel I'm gonna throw the night optic on my carbine length AR. Its been so long since I've shot it, I forgot it was in the safe.
