Anyone used Alpha and Omega Rifle and Tool

[ncboiler]

Anyone used Alpha and Omega Rifle and Tool for a bolt action build?

 

[Lonestar1027]

I had Caleb spin me up a 6BRA barrel. I had to immediately go underway after I got the barrel so I haven't had a chance to shoot it. The turnaround time was unreal(7 days?) and he was very easy to work with. Prices were more than reasonable and I was very happy with the entire process. I found his contact info on a 6mm forum, and they had great results with him as well. If you don't mind waiting, I should have range results in the next 6 weeks.

 

[ncboiler]

Thanks for the feedback.

 

[Possumpete]

I had Caleb do a 6bra for me and have just started fire forming brass.Barrel is a hammer.I will have him do another.I think you will be pleased.Nice guy to boot

 

[PinesAndProjectiles]

No, but he's fairly well known in the Midwest precision rifle community. He sponsors some shoots and gives back. I've heard nothing but good things about him.

 

[CleanColdBore]

I had Caleb do a 6bra for me and have just started fire forming brass.Barrel is a hammer.I will have him do another.I think you will be pleased.Nice guy to boot

I am thinking about a 6BRA for my next build. This is good to hear! What type of load and speed are you getting on your fire form rds?

 

[Possumpete]

When Barrel was brand new 2720 with fire form loads,and I haven’t checked it since but it doesn’t have but maybe 300 rounds on it now.I let a buddy shoot it in last match we had,worked out good his rifle went south and needed one and I needed the fire forming done.

 

[Lonestar1027]

I got 2860fps,SD of 8.3 over 100 shots using 29.5gr of H4895. 3 Shot group at 200 yards, all rounds touching. Pleased would be an understatement.

 

[CleanColdBore]

I got 2860fps,SD of 8.3 over 100 shots using 29.5gr of H4895. 3 Shot group at 200 yards, all rounds touching. Pleased would be an understatement.

Awesome. Who chambered your 6BRA?

 

[Lonestar1027]

Caleb over at Alpha and Omega Rifle and Tool chambered it. Mind you, this was just a fireforming load. 20 thousands off the lands, safe powder charge, nothing special. I'm hoping to hit the 2920 fps or the 2960 fps node with another grain-ish of powder and then see how much better it shoots. I went with a Krieger 1-7.5 twist finished at 28" shooting some Berger 105 Hybrids. I'll update with results after load development, but I can't say enough good things about Alpha and Omega Rifle. I was nailing prairie dogs at 600 yards with just a fireforming load.

 

[CleanColdBore]

Caleb over at Alpha and Omega Rifle and Tool chambered it. Mind you, this was just a fireforming load. 20 thousands off the lands, safe powder charge, nothing special. I'm hoping to hit the 2920 fps or the 2960 fps node with another grain-ish of powder and then see how much better it shoots. I went with a Krieger 1-7.5 twist finished at 28" shooting some Berger 105 Hybrids. I'll update with results after load development, but I can't say enough good things about Alpha and Omega Rifle. I was nailing prairie dogs at 600 yards with just a fireforming load.

That is awesome...I will have to give him a call asap!

 

[Atkison]

I ALSO HAD CALEB AT ALPHA OMEGA RIFLE CHAMBER ME A 26" BARTLEIN 1:7 IN 6MM BRA ON A BIGHORN ORIGIN ACTION. CURRENTLY I HAVE ABOUT 130 ROUNDS ON IT, AND IT IS A HAMMER! I'VE SHOT IT OUT TO 800 YDS SO FAR AND IT IS SPOT ON. SENDING THE 110 GRAIN SIERRA MATCHKINGS @ 2925FPS

 

[skipnay]

I am thinking about using Caleb for a 22 Creedmoor build. I was wondering if I should step away or if I should send him money. It's my very first custom gun and I have never paid more than $1500 for a gun.

 

[Atkison]

I WOULDN'T HESITATE TO SEND HIM MONEY, HE'S AN HONEST GUY. I HAVE HAD NOTHING BUT GOOD LUCK DEALING WITH HIM MYSELF. YOU WON' T BE DISAPPOINTED!

 

[Possumpete]

Caleb is A Good guy,deal with confidence!