APA Gen II Fat Bastard & Little Bastard

Jered Joplin

Jered Joplin

Gunny Sergeant
Commercial Supporter
Full Member
Minuteman
Jan 17, 2004
1,164
2
Jefferson GA
www.americanprecisionarms.com
#1
I just wanted to give you guys a peek at our new Gen II Little Bastard. We are sending 10 out to the K&M match and the Hide cup along with some other goodies. If you guys happened to be there check one out and let me know what you think.

These will come caliber specific if specified or undersized if a gunsmith wants to bore it. There are no crush washers, to flat washers, no Loctite, and no gun smithing required. If you barrel is threaded from the factory simply remove it from the package
install and go wake the locals up with it. We will be making this in four versions:

Gen II Micro Bastard
Gen II Little Bastard
Gen II Fat Bastard
Gen II XXX

We are planning on releasing just about every standard thread pitch you guys might need for you factory rifle from AI's and TRG's to Remington.

 
Last edited:
#5
jasonk said:
I'm confused, how does it not need to be timed in the event those ports are pointing straight down and blowing crap back at you?
Click to expand...


Looks like you time it by backing the nut off against the barrels shoulder to tighten, Great Idea. Will be looking for one of these.


The man beat me to it.
 
Last edited:
#9
We are running the Little Bastards now. If you call Jodie in the office she can get you on the waiting list for any of them. 706-367-8881 You can also email her at [email protected]
You just need to specify which brake you need and that it's a Gen II. We also need to know if it's caliber specific or you want your smith to open it prior to shipping. She doesn't need that information currently.
 
#10
Jered Joplin said:
We are running the Little Bastards now. If you call Jodie in the office she can get you on the waiting list for any of them. 706-367-8881 You can also email her at [email protected]
You just need to specify which brake you need and that it's a Gen II. We also need to know if it's caliber specific or you want your smith to open it prior to shipping. She doesn't need that information currently.
Click to expand...

Thanks

Sent from my SCH-I605 using Tapatalk
 
#18
Right now they are all 4140 steel and will come parkerized. MSRP is set at $160 for the LB's and Micro's. $185 on the FB's. The XXX we aren't sure yet.
As far as the stainless goes we aren't sure yet. We made 6 and will test them on our Team rifles. I'm afraid that some people are going to get crazy with a wrench and SS will gall a lot easier. They don't take much at all to tighten. You can almost do it by hand.

We have had zero request for a 9/16x18 thread but we have had requests for 9/16x24 so it's possible we will add that to the line up at some point. Right now we have a ton of steel to blaze through.
 
#21
I'm really looking forward to having this, too. Going to be sweet! It's been really cool to see this from concept through several initial designs, to final product here. Jered, as usual you've outdone yourself with design and execution.
 
#23
people throw the words game changer around purdy loosely these days.

a self timed brake with the APA accuracy Joplins fameous for, will def be a legit game changer. thats smart thinkin right there
 
#39
if you want another GA boy to do some extensive testing for you on the GEN ii FAT BASTARD, I will document all my findings and post them here!!!!! it will go on a 300rum and 200gr accubonds, 95g retumbo........
 
#42
It will tighten up by hand but it will need a slight bump with a crescent wrench to keep it locked in please while firing. If it's just hand tight it could possibly come loose at some point.
It is 1" but keeping up with a small crescent wrench in your range bag will be a lot easier than most 1" wrenches.
 
#43
i was thinkin a 1" crows foot with no handle attached might give you just enough hand tight leverage and not allow ya to over tighten. takes up virtually no room/wt as well.
 
#45
In regard to tightening, would you consider making a wrench with a Bobbitted handle to go with the brake?
Just a nub of a handle with a hole for a paracord loop perhaps?
 
You must log in or register to reply here.

Similar threads

B
Accessories WTS APA 3rd gen little bastard 18x1
Replies
0
Views
68
BountyHunter
B
Bolt Thrower
SOLD APA Little Bastard Brake (5/8x24, 0.295" Bore, Nitride)
Replies
3
Views
203
gasrat
gasrat
ChrispyCreamer
SOLD APA Fat Bastard Gen 3
Replies
3
Views
311
ChrispyCreamer
ChrispyCreamer
Safety_3rd
Accessories Gen II APA Fat Bastard 338 nitride
Replies
2
Views
180
Safety_3rd
Safety_3rd
wpeach1912
SOLD APA Fat Bastard Gen 3 $120
Replies
4
Views
281
wpeach1912
wpeach1912
Top Bottom
Back
Home
Forums
Merch
Alerts