• Cold Bore Ritual Contest - Only a Few Hours Left To Enter!

    What’s your cold bore ritual, that one thing you always do before your first shot to set yourself up for success? Winner gets new limited edition Hide merch. Remember, subscribers have a better chance of winning!

    Join contest Subscribe

AR-50 DIY Omni Cheek rest and mono pod.

pbreaction

Private
Full Member
Minuteman
Nov 26, 2013
7
0
Hey i just wanted to post this project i just finished up.

Bought an AR-50 a few months ago and realized me being left handed does not work well with the type of cheek rest that comes with the gun. And as far as i could find i didnt see any aftermarket ones i could buy so off to home depot...

Used some brackets in the wood section that support wood frame joints so after some bending and welding this is what i came up with.

The metal was a little hard on the cheek so i used a black mouse pad and jb welded it to the frame after using some rustolem epoxy paint and an oven soak at 400F for an hour.

I used 2 bicycle seat quick release bolts for the mount

Then i saw... there was an aftermarket mono pod from APA for 159.00

Which was a little out of my price range since i was saving up for the nightforce scope.

So i used the same bracket from the cheek rest and quick release C clamp that i cut after some welds and paint job this is what i turned out with.

Its relatively stable given it was 10.00.


But just figured i would give anyone a heads up if they are left handed and thinking of not spending the extra money to buy a brand new lefty ar-50.

Pics