Nearly matching set of consecutive SN 19x pistols with custom work by ATEi.
I ran both guns for a few thousand rounds at various classes. Originally they had stainless KKM barrels but now have the Nitride finish barrels. I've also replaced the springs in each gun and put them away last year and haven't touched them since.
ATEi did the following (each package worth over $800):
- Pro RMR cut specific for the provided optic
- Enhanced serration package
- Dovetail cut for forward mounted rear sight
- Ameriglo suppressor height sights
- "medium" texture grip package (though they vary between the two)
- Fde slide re-finish
- trigger guard cut
(Note: one frame has had the proprietary front "tab" removed to accept Gen 4/5 magwells and Gen 5 mags)
The guns have the following parts packages:
- Overwatch Precision NP3 trigger bar, metal FALX trigger
- NP3 "-" minus disconnector
- KKM Black Nitride barrels (one with KKM comp); black nitride is currently no longer a KKM option
- Glockmeister grip plug
- Trijicon RMR Type 2 3.25 MOA red dot
- Tau striker control device
Also included:
5x 17-round mags
6x 19-round mags (17's with factory +2 extensions)
2x recoil spring assemblies (the ones in the gun are new)
2x oem "." dot disconnector
2x oem back plates
2x sets of ATEi optic mounting screws
1x set of grip panels
1x Surefire X300 Ultra (the non-1000 lumen with the tight hotspot)
Asking $4200 shipped for both guns as shown
I ran both guns for a few thousand rounds at various classes. Originally they had stainless KKM barrels but now have the Nitride finish barrels. I've also replaced the springs in each gun and put them away last year and haven't touched them since.
ATEi did the following (each package worth over $800):
- Pro RMR cut specific for the provided optic
- Enhanced serration package
- Dovetail cut for forward mounted rear sight
- Ameriglo suppressor height sights
- "medium" texture grip package (though they vary between the two)
- Fde slide re-finish
- trigger guard cut
(Note: one frame has had the proprietary front "tab" removed to accept Gen 4/5 magwells and Gen 5 mags)
The guns have the following parts packages:
- Overwatch Precision NP3 trigger bar, metal FALX trigger
- NP3 "-" minus disconnector
- KKM Black Nitride barrels (one with KKM comp); black nitride is currently no longer a KKM option
- Glockmeister grip plug
- Trijicon RMR Type 2 3.25 MOA red dot
- Tau striker control device
Also included:
5x 17-round mags
6x 19-round mags (17's with factory +2 extensions)
2x recoil spring assemblies (the ones in the gun are new)
2x oem "." dot disconnector
2x oem back plates
2x sets of ATEi optic mounting screws
1x set of grip panels
1x Surefire X300 Ultra (the non-1000 lumen with the tight hotspot)
Asking $4200 shipped for both guns as shown
