AXMC and Spuhr mount combination with S&B 5-25

[Canuck1977]

Hi guys,

Just wanted to know what Spuhr mount you are using on your AXMC with a S&B 5-25?

 

[blbennett1288]

1.35" might work, but it'll be close. Personally I wouldn't use anything under 1.5" on a AX

 

[sharpshot50]

I use the SP-4002 1.5" with 0 MOA cant. I would definitely not go lower as it's already very close.

 

[BullzeyeNJ]

4002 here too

 

[blbennett1288]

4602

 

[BEJ762]

a 0 MOA 1.35" will work but will leave very little room for scope caps. Ran this on a pre-14 AX338 with 56mm objective SB for a while. However, having gone down this path, the 0 MOA 1.5" height mount is the correct option for this platform IMHO - I can shoot my 300NM AXMC out to 2400yds with that set up.

 

[Huskydriver]

4002 @1.5"

 

[jim996]

This is mine with the 4002

https://spuhrwebshop.com/en/isms/sp/34/0-mil/sp-4002.html

 

[NukeMMC]

4002 here with PMII 5-25 and Tenabraex covers

 

[trophyhunter]

I run a 4006 (1.35”) on my 3-27 & Tenebrex caps. It clears with just enough room

 

[craigos]

Hi guys,

Just wanted to know what Spuhr mount you are using on your AXMC with a S&B 5-25?

1.5" height.

 

[AIAW]

SP-4302 on anything coupled with a 30 MOA rail is ideal for a S&B 5-25x to gain the full mechanical travel.