AXSR stock collapsing under recoil?

[Slu54]

So I took apart the levers and put them on again, I might've done it wrong.

The LOP adjust collapses if I hit it hard enough. I've tightened the screw to the point where it's very hard to disengage the lever, but if I hit the stock hard enough it'll still collapse.

I also noticed the LOP doesn't spring back like the cheek piece springs up. I also can't feel any of the numbered lengths.

Did I mess something up? It's just the screw, the metals plates on either side, the spring, and the lever right?

Thanks

 

[whatsupdoc]

Posting some pictures may help

 

[ForgeValley]

Make sure you have the teeth on the metal plate engaging at the top rod, not the bottom.

 

[Slu54]

Make sure you have the teeth on the metal plate engaging at the top rod, not the bottom.

Yep, that was it. Fixed. Thanks.

 

[TylerN]

Make sure you have the teeth on the metal plate engaging at the top rod, not the bottom.

Yup, check this. I've screwed this up and had the cheek rest collapsing before.