Badger Ordnance 34mm C1 Max Ring Mount Height with a suppressor

[az_usmc]

I have a new Nightforce ATACR - 7-35x56mm F1 scope being mounted on my Rem 700 XCR 308. I am having the 26" thick barrel threaded for my suppressor and I need to know how high the rings should be for a 56mm objective lense off the barrel to see over the suppressor wrap, if it would have any impact on the height at all. The red dot on my Beretta M9 won't see over its suppressor with the wrap on. The recommendations for a 56mm lense are 1.30" tall but I'm not sure if that includes seeing over the extended 7 inch HUXWRX suppressor with a wrap at the end of the barrel. I've tried to contact Badger Ordnance but they won't answer their phone or my emails. Can anyone give me some insight on this issue please?

 

[Trigger Monkey]

You’re not going to see the suppressor through the optic because it’s a magnified optic.

 

[TheOE800]

You’re not going to see the suppressor through the optic because it’s a magnified optic.

Not a 7x low end with that FOV anyway..

 

[az_usmc]

OK, Great. I never had a suppressor at the end of that barrel so I didn't know if it would make a difference with the height of the optics. ATF just gave me my suppressors 6 months ago. On my M9A4, the red dot won't see over the suppressor wrap so I was wondering if the scope would do the same with the minimum ring rise. I'll get the 1.30" then. Thank you very much for the info. SFMF's