Does anyone know of a program that will give the height and the distance of that height during flight. Example distance 1400yd Max height 100 ft at 800 yd. (not real #)
Range Report Ballistic Calculator
- Thread starter hogginit
- Start date
Re: Ballistic Calculator
JBM is handy for that, but it can be done with any ballistics program.
http://www.jbmballistics.com/cgi-bin/jbmtraj-5.1.cgi
Set the column 1 output to inches, and set the rest of the initial screen for your load.
Then change the zero range to the range you're shooting, for which you want to know the max ord.
The biggest number in the output in inches is the max ordinate.
If you use another program, you'll have to translate whatever drop it puts out into inches or feet. Using JBM is easier.
JBM is handy for that, but it can be done with any ballistics program.
http://www.jbmballistics.com/cgi-bin/jbmtraj-5.1.cgi
Set the column 1 output to inches, and set the rest of the initial screen for your load.
Then change the zero range to the range you're shooting, for which you want to know the max ord.
The biggest number in the output in inches is the max ordinate.
If you use another program, you'll have to translate whatever drop it puts out into inches or feet. Using JBM is easier.
Re: Ballistic Calculator
Jbm is what I have been using. I was to stupid to move the zero.
Thanks.
Jbm is what I have been using. I was to stupid to move the zero.
Thanks.
Re: Ballistic Calculator
thank you Lindy, this is great website, it sure helps me.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Lindy</div><div class="ubbcode-body">JBM is handy for that, but it can be done with any ballistics program.
http://www.jbmballistics.com/cgi-bin/jbmtraj-5.1.cgi
Set the column 1 output to inches, and set the rest of the initial screen for your load.
Then change the zero range to the range you're shooting, for which you want to know the max ord.
The biggest number in the output in inches is the max ordinate.
If you use another program, you'll have to translate whatever drop it puts out into inches or feet. Using JBM is easier.
</div></div>
thank you Lindy, this is great website, it sure helps me.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Lindy</div><div class="ubbcode-body">JBM is handy for that, but it can be done with any ballistics program.
http://www.jbmballistics.com/cgi-bin/jbmtraj-5.1.cgi
Set the column 1 output to inches, and set the rest of the initial screen for your load.
Then change the zero range to the range you're shooting, for which you want to know the max ord.
The biggest number in the output in inches is the max ordinate.
If you use another program, you'll have to translate whatever drop it puts out into inches or feet. Using JBM is easier.
</div></div>
