hi all, i recently received my manners t4a stock which is inletted for a m24 barrel contour. i am going to be receiving my krieger #17 heavy varmint barrel sometime this week. should this work ok for me? any help would be great!
barrel contour question
- Thread starter masonjp
- Start date
Re: barrel contour question
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: masonjp</div><div class="ubbcode-body">hi all, i recently received my manners t4a stock which is inletted for a m24 barrel contour. i am going to be receiving my krieger #17 heavy varmint barrel sometime this week. should this work ok for me? any help would be great! </div></div> I think the #17 has about a 5" straight shank before the tapper the m24 is only 3"' you should be close with our inlet, maybe just a little on the snug side. Might need to paper it in. If we can help let me know. Thank you.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: masonjp</div><div class="ubbcode-body">hi all, i recently received my manners t4a stock which is inletted for a m24 barrel contour. i am going to be receiving my krieger #17 heavy varmint barrel sometime this week. should this work ok for me? any help would be great! </div></div> I think the #17 has about a 5" straight shank before the tapper the m24 is only 3"' you should be close with our inlet, maybe just a little on the snug side. Might need to paper it in. If we can help let me know. Thank you.
Re: barrel contour question
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Thomas Manners</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: masonjp</div><div class="ubbcode-body">hi all, i recently received my manners t4a stock which is inletted for a m24 barrel contour. i am going to be receiving my krieger #17 heavy varmint barrel sometime this week. should this work ok for me? any help would be great! </div></div> I think the #17 has about a 5" straight shank before the tapper the m24 is only 3"' you should be close with our inlet, maybe just a little on the snug side. Might need to paper it in. If we can help let me know. Thank you. </div></div>
thanks for the help tom I really appreciate it. love the stock.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Thomas Manners</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: masonjp</div><div class="ubbcode-body">hi all, i recently received my manners t4a stock which is inletted for a m24 barrel contour. i am going to be receiving my krieger #17 heavy varmint barrel sometime this week. should this work ok for me? any help would be great! </div></div> I think the #17 has about a 5" straight shank before the tapper the m24 is only 3"' you should be close with our inlet, maybe just a little on the snug side. Might need to paper it in. If we can help let me know. Thank you. </div></div>
thanks for the help tom I really appreciate it. love the stock.
