I'm going to shoot my first ELR match in January. I bought a used desert tech 40Moa scope mount and have 7x35 atacr scope. From my research the barrett mrad has a 20moa picatinny mount. Since my scope has roughly 120moa of travel I was thinking with my 20moa Pic rail and 40 moa scope mount I would be able to get my full 120moa elevation out of my scope. After I put it all together I still have a lot of negative scope travel. Like maybe my rail is actually zero moa. The scope mount has 40moa printed on the side so I don't think it's that. Could it be somehow related to the zero stop on my nightforce 7x35 atacr. I will need my full 120 moa of elevation for this match.
Barrett MRAD 338 lapua
- Thread starter Greenlight
- Start date
Don't know the MRAD specs, but visually you should easily be able to determine if it's a 20 minute or level (0) rail...
NF lists that scope as having 100 minutes of travel, so somewhere around 50 minutes "up" available. Remember that half of total travel is a rough estimate- depends on your rifle. I wouldn't cut it too tight- leave yourself plenty of adjustment when planning.
NF lists that scope as having 100 minutes of travel, so somewhere around 50 minutes "up" available. Remember that half of total travel is a rough estimate- depends on your rifle. I wouldn't cut it too tight- leave yourself plenty of adjustment when planning.
Last edited:
Similar threads
