SOLD Bartlein carbon 223 16” Prefit- Impact 737

[65x55guy]

Purchased barrel recently thinking I needed a .223 trainer, but decided to go with a .22 LR instead.

7 twist. Chambered by Stuteville, threaded 5/8 x 24 at the end. 220 rounds through it.

Currently has a TBAC CB mount on it that I would included for $90. Already timed.

$850 for barrel, $940 with the CB mount.

 

[Trent A]

This is for the barrel only, right (and optional CB mount)?

 

[65x55guy]

Yes, but of course everything is always for sale. PM me if you want to buy a mostly complete trainer. Have everything but a .223 bolt face.

 

[Rogerthatout]

Does anyone know if I can put this in my Christen arms chassis? I have a .308 MPR and I really want to get a .223. This might be better than trying to buy it out of box

 

[Rogerthatout]

I’m looking at a possible purchase of the action and barrel if it will go into my Christen Arms MPA CHASSIS

 

[65x55guy]

I’m looking at a possible purchase of the action and barrel if it will go into my Christen Arms MPA CHASSIS

Send me a picture of the inside of the chassis and bedding block area. I can compare it to my manners mini chassis.

 

[generalzip]

No it won’t fit. The recoil lug is too big on the impact for the MPR chassis. I’ve tried. If you mill it out it will likely make the area too weak. You need a standard Remington 700 lug. I forget the size but they are thinner than all the custom action lugs

 

[Rogerthatout]

No it won’t fit. The recoil lug is too big on the impact for the MPR chassis. I’ve tried. If you mill it out it will likely make the area too weak. You need a standard Remington 700 lug. I forget the size but they are thinner than all the Vostok action lugs

Thanks op

 

[65x55guy]

Monday bump for everyone.

 

[65x55guy]

Bump for Wednesday.