I have a B-14 that at best will shoot .95 group and on average 1.5 with 120 match burners. This is obviously a hunting rifle and I want to use hunting bullets. I did get Nosler 120 ballistic tips to shoot around a 1.25 group, but only at 2450 fps at the muzzle. I have used 4 different match type factory loads with mixed results and have not had any 140 grain group under an inch most 2.5. After a pound of h4350 and many loads of imr4350, 4895 imr and Hodgdon superformance and 3 types primers and 4 factory hunting loads and 2 different scopes I give up. I have read many posts about problems with Bergara rifle but no one posts the out come of the customer service they received except negative things. When I get a new rifle I torque the stock screws, clean the barrel and chamber, blow the bolt out with degreaser and head to the range. That being said there was little to no grease in or on the bolt actually a little spot of rust. I did call Bergara on Friday with all my data the seating depths loads data ready to get some answers and was told to clean the bolt better.... then call them back before I can ship the gun back. I guess my simplest fix is to trade it off. Has anyone had a problem like this actually fixed by Bergara? I hear if they get a match load to shoot to their standard they just send the rifle back. I want this for hunting, not paper, this was a gift from my wife so not easy to get rid of.
Last edited: