-
Having trouble using the site?
Contact support
Brass Preparation Service
- Thread starter rgkeller
- Start date
Re: Brass Preparation Service
just how fare /mow much youy want done.sizeing,neck turning,primer pockets,annealing, and so on.what case you want done and for what kind of chamber.factory,match,you know tight or loose.
John
just how fare /mow much youy want done.sizeing,neck turning,primer pockets,annealing, and so on.what case you want done and for what kind of chamber.factory,match,you know tight or loose.
John
Re: Brass Preparation Service
I was thinking I would do the initial cleaning and resizing and then send the brass to someone set up with all the fancy tools to do the pockets, the triming, the champhering and whatever else and then send the brass back to me for priming, powder and seating.
In lots of 500 minimum, new to start, then fired. Winchester.
I was thinking I would do the initial cleaning and resizing and then send the brass to someone set up with all the fancy tools to do the pockets, the triming, the champhering and whatever else and then send the brass back to me for priming, powder and seating.
In lots of 500 minimum, new to start, then fired. Winchester.
Re: Brass Preparation Service
hey I can cut the primer pocket's,cut the length.champher and deburr [ 45/vld ]champher.even full length or neck the brass.just your looking into spending alot of money to this.I am quessing 125.00 or more.I wouldn't do it for less.500 pcs is alot of time.even the wear on the tools need to be counted for. do you just not have the time and have alot of money?if so I may do it for ya,but need to think about it.let me know whats going on.
John
hey I can cut the primer pocket's,cut the length.champher and deburr [ 45/vld ]champher.even full length or neck the brass.just your looking into spending alot of money to this.I am quessing 125.00 or more.I wouldn't do it for less.500 pcs is alot of time.even the wear on the tools need to be counted for. do you just not have the time and have alot of money?if so I may do it for ya,but need to think about it.let me know whats going on.
John
Re: Brass Preparation Service
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: rgkeller</div><div class="ubbcode-body">this doesn't sound like as good an idea as I thought
5R, let me think about this a while </div></div>
You need to get you're self down to one of the southern States, and get yourself one of them there "Wetbacks"...One hours training, and he'll prep and trim your cases, and trim your grass as well, all for the cost of a case of beer a week!
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: rgkeller</div><div class="ubbcode-body">this doesn't sound like as good an idea as I thought
5R, let me think about this a while </div></div>
You need to get you're self down to one of the southern States, and get yourself one of them there "Wetbacks"...One hours training, and he'll prep and trim your cases, and trim your grass as well, all for the cost of a case of beer a week!
Re: Brass Preparation Service
Pete,
We tried that a little further north with the Scotch (poor impoverished bunch that they are), but by the time they'd stoped fighting over the scrap brass all we'd got left was bloody WIRE.
Just another beer mat idea shit canned......
Pete,
We tried that a little further north with the Scotch (poor impoverished bunch that they are), but by the time they'd stoped fighting over the scrap brass all we'd got left was bloody WIRE.
Just another beer mat idea shit canned......
Re: Brass Preparation Service
[hijack]
5R, do I know you? You're right down the road from me. I just noticed your location and don't remember meeting you, but readily admit to having a terrible memory. If not, we should get together sometime.
[/hijack]
[hijack]
5R, do I know you? You're right down the road from me. I just noticed your location and don't remember meeting you, but readily admit to having a terrible memory. If not, we should get together sometime.
[/hijack]
