Bye

[ronwild]

Bye

 

[J-Ham]

Mitutoyo 500-196-30 Digimatic 0-6''/150MM Stainless Steel Digital Caliper

Mitutoyo 500-196-30 Digimatic 0-6''/150MM Stainless Steel Digital Caliper. Ships in One Business Day. Buy it and Save at GlobalIndustrial.com

www.globalindustrial.com

 

[hollowoutadime]

Mitutoyo 500-196-30​

 

[THEIS]

Hi,

Take your spam shit somewhere else.....

Sincerely,
Theis

 

[Rthur]

My bad, fuck that guy

R

 

[NoDopes]

If you want to go poors, these have been spot on and returns to perfect zero every time for a couple years now.

Amazon.com

 

[Mwalex]

I'm poor

 

[mi223]

Hi,

Take your spam shit somewhere else.....

Sincerely,
Theis

What did I miss? I didn't and now don't dare to open the link

 

[buggsb]

Mitutoyo​

 

[Baron23]

What did I miss? I didn't and now don't dare to open the link

Its just a link to a UK site selling calipers.....and @THEIS was spot on...guy joined to day just to post what looked like a legit question just in order to convey a link to his commercial site. Def spam...def asshole move to try to hide it.

 

[sirhrmechanic]

Digital Micrometers, Inc., which the OP Posted is a garbage company and they sell crap micrometers that won't hold a zero... have jaws so soft that they will crater if you try and measure a Nerf ball. And are filled with Chinese electronics that won't manage to hold up for a week.

You would be better off using a carpenters Tape Measure to try and get a "Maybe" .0625 tolerance than using ANYTHING from Digital Micrometers, Inc.

Anyone searching on the company Digital Micrometers, Inc. is going to find this thread and know that their products suck more balls than all the Kardashians put together. Because the OP tried to Spam us here. And we did our research and found out that he is selling garbage products that NO good machinist should buy.

In addition, he did it in such a way that cost his company more bad PR and damage than could ever be re-coup'd by his spamming other forums.

Don't buy Digital Micrometers, Inc. products. They are total ChiCom crap. Always have been and always will be.

Want a good micrometer... go to Mitutoyo or Spi or Starrett. MSC sells them reasonably. And they are all good products. Unlike the garbage from Digital Micrometers, Inc.

Oh, OP... stand by for the ban. After which we will ridicule you mercilessly for screwing your company over massively with your retarded post.

Sirhr

 

[sirhrmechanic]

 

[roostercogburn98]

View attachment 7707017

I though we were supposed to post cat pictures when summoning a bancat demon

 

[Stevo86]

Or you can just tell the OP to get the fuck outta here with that shit.

 

[johnnycat]

Digital Micrometers, Inc. is not a reputable company.

I will never buy a Digital Micrometers, Inc. product again.

I'm embarrassed that I bought a set of calipers Digital Micrometers, Inc. in the first place.

Stay away from Digital Micrometers, Inc.

 

[Nik H]

Digital Micrometers, Inc
Digital Micrometers, Inc
Digital Micrometers, Inc
Digital Micrometers, Inc
Digital Micrometers, Inc
Digital Micrometers, Inc
Digital Micrometers, Inc
Digital Micrometers, Inc

Window licking cunts

 

[Fig]

 

[Barneybdb]

Digital Micrometers, Inc. is not a reputable company.

I will never buy a Digital Micrometers, Inc. product again.

I'm embarrassed that I bought a set of calipers Digital Micrometers, Inc. in the first place.

Stay away from Digital Micrometers, Inc.

I agree...

 

[roostercogburn98]

Might as well just use your hand

 

[Mike Casselton]

Digital micrometers inc?

Hell, even Harbor Freight sells better equipment than DMI.

Does DMI stand for Dick Me Internally?

 

[DarnYankeeUSMC]

I ain't rich or anything but I do have a few 10mm wrenches!!!

I'm poor

View attachment 7706768

And no, I don't overnight ship! As a matter of fact they ain't for sale.

Well maybe if the price is right. Check the underground px for details.

 

[oneshot86]

Fuck, I thought he was talking about brake pads on a main battle tank

 

[akmike47]

Have to be careful with mitutoyo fakes are prevalent on eBay and whatnot. I’ve seen a few in person.

Fonts wrong, and they come with a really cheap button cell that’s junk there’s pictures on google for how to spot them.

 

[MtnCreek]

Bought from Digital Micrometers, Inc. once. Made my dog turn gay. Never again Digital Micrometers, Inc. you bunch of dog hating, purple haired faggots.

 

[AngryKoala]

Digital Micrometers, Inc., which the OP Posted is a garbage company and they sell crap micrometers that won't hold a zero... have jaws so soft that they will crater if you try and measure a Nerf ball. And are filled with Chinese electronics that won't manage to hold up for a week.

You would be better off using a carpenters Tape Measure to try and get a "Maybe" .0625 tolerance than using ANYTHING from Digital Micrometers, Inc.

Anyone searching on the company Digital Micrometers, Inc. is going to find this thread and know that their products suck more balls than all the Kardashians put together. Because the OP tried to Spam us here. And we did our research and found out that he is selling garbage products that NO good machinist should buy.

In addition, he did it in such a way that cost his company more bad PR and damage than could ever be re-coup'd by his spamming other forums.

Don't buy Digital Micrometers, Inc. products. They are total ChiCom crap. Always have been and always will be.

Want a good micrometer... go to Mitutoyo or Spi or Starrett. MSC sells them reasonably. And they are all good products. Unlike the garbage from Digital Micrometers, Inc.

Oh, OP... stand by for the ban. After which we will ridicule you mercilessly for screwing your company over massively with your retarded post.

Sirhr

I have to recommend the Starrett over the mitutoyo as the thumb dial broke after a few uses on the Mitutoyo. It could have been a lemon though.

 

[tomcatmv]

wait.....what? did somebody say they had 10 mm sockets?

 

[DuneBoer]

Was DIGITAL MICROMETERS INVOLVED IN CHILD PORNOGRAPHY

 

[Bigfatcock]

Still available? I heard it only comes in Mils?

 

[Ravenworks]

Was DIGITAL MICROMETERS INVOLVED IN CHILD PORNOGRAPHY

Digital Micrometers Inc. most definitely was into pOrn they also used my manhood as a Standard.

 

[Yasherka]

Whats everyone using for the 150mm digital caliper?

Not yours

 

[Mike Casselton]

wait.....what? did somebody say they had 10 mm sockets?

Nope. Just hope bias.

They were 10 mm WRENCHES...

 

[Mike Casselton]

Was DIGITAL MICROMETERS INVOLVED IN CHILD PORNOGRAPHY

Was?
Are...

 

[sirhrmechanic]

Btw, they are a British company… so it’s totally retarded for them to spam here.

For those who want to ensure that the op gets fired… Send spam to [email protected]

their Digital Marketing Director is this Carnaby St. poof.

https://uk.linkedin.com/in/richwilde90

Who is probably behind the above spam.

Sirhr

 

[DuneBoer]

Btw, they are a British company… so it’s totally retarded for them to spam here.

For those who want to ensure that the op gets fired… Send spam to [email protected]

their Digital Marketing Director is this Carnaby St. poof.

https://uk.linkedin.com/in/richwilde90

Who is probably behind the above spam.

Sirhr

UK you say?

DIGITAL MICROMETERS LINKED TO ANTI-COVID VAX GROUP.

 

[JMGlasgow]

Dial calipers for me. They never need batteries.

I have one that does Metric and SAE.

 

[kc7pwx]

Harbor freight caliper for me.

 

[LawnMM]

Milliwhat?

How many inches we talking?

 

[eflyguy]

Genuinely curious why spam is not removed here? It's not like the mods are not active..

 

[sirhrmechanic]

Genuinely curious why spam is not removed here? It's not like the mods are not active..

Did you report the op for banning? The rest of the thread should stand as an abject lesson on why you don’t spam this place…

Sirhr

 

[Doc68]

wait.....what? did somebody say they had 10 mm sockets?

I hear they are easy to come by in the UGPX all the time.

Doc

 

[...]

Digital calipers....lol

stop being a pussy and buy a set of Vernier calipers like a real man

 

[Fig]

Digital Micrometers, Inc. Digital Micrometers, Inc. Digital Micrometers, Inc. Digital Micrometers, Inc. Digital Micrometers, Inc.
Digital Micrometers, Inc. Digital Micrometers, Inc. Digital Micrometers, Inc. Digital Micrometers, Inc. Digital Micrometers, Inc.
Digital Micrometers, Inc. Digital Micrometers, Inc. Digital Micrometers, Inc. Digital Micrometers, Inc. Digital Micrometers, Inc.
Digital Micrometers, Inc. Digital Micrometers, Inc. Digital Micrometers, Inc. Digital Micrometers, Inc. Digital Micrometers, Inc.
Digital Micrometers, Inc. Digital Micrometers, Inc. Digital Micrometers, Inc. Digital Micrometers, Inc. Digital Micrometers, Inc.
Digital Micrometers, Inc. Digital Micrometers, Inc. Digital Micrometers, Inc. Digital Micrometers, Inc. Digital Micrometers, Inc.
Digital Micrometers, Inc. Digital Micrometers, Inc. Digital Micrometers, Inc. Digital Micrometers, Inc. Digital Micrometers, Inc.
Digital Micrometers, Inc. Digital Micrometers, Inc. Digital Micrometers, Inc. Digital Micrometers, Inc. Digital Micrometers, Inc.
Digital Micrometers, Inc. Digital Micrometers, Inc. Digital Micrometers, Inc. Digital Micrometers, Inc. Digital Micrometers, Inc.
Digital Micrometers, Inc. Digital Micrometers, Inc. Digital Micrometers, Inc. Digital Micrometers, Inc. Digital Micrometers, Inc.

​

Or as Army Jerry would say, "The Oldest Enemy".

 

[sirhrmechanic]

I just want to point out...

Digital Micrometers, Inc. Digital Micrometers, Inc. Digital Micrometers, Inc. Digital Micrometers, Inc. Digital Micrometers, Inc.
Digital Micrometers, Inc. Digital Micrometers, Inc. Digital Micrometers, Inc. Digital Micrometers, Inc. Digital Micrometers, Inc.
Digital Micrometers, Inc. Digital Micrometers, Inc. Digital Micrometers, Inc. Digital Micrometers, Inc. Digital Micrometers, Inc.
Digital Micrometers, Inc. Digital Micrometers, Inc. Digital Micrometers, Inc. Digital Micrometers, Inc. Digital Micrometers, Inc.
Digital Micrometers, Inc. Digital Micrometers, Inc. Digital Micrometers, Inc. Digital Micrometers, Inc. Digital Micrometers, Inc.
Digital Micrometers, Inc. Digital Micrometers, Inc. Digital Micrometers, Inc. Digital Micrometers, Inc. Digital Micrometers, Inc.
Digital Micrometers, Inc. Digital Micrometers, Inc. Digital Micrometers, Inc. Digital Micrometers, Inc. Digital Micrometers, Inc.
Digital Micrometers, Inc. Digital Micrometers, Inc. Digital Micrometers, Inc. Digital Micrometers, Inc. Digital Micrometers, Inc.
Digital Micrometers, Inc. Digital Micrometers, Inc. Digital Micrometers, Inc. Digital Micrometers, Inc. Digital Micrometers, Inc.
Digital Micrometers, Inc. Digital Micrometers, Inc. Digital Micrometers, Inc. Digital Micrometers, Inc. Digital Micrometers, Inc.


This should help their Internet Search Results. AND the little Nancy Boy who is their digital marketing director (see above) still needs to get fired for being such a moron that he thinks spamming sites like this is actual digital marketing.

Can't wait to see what happens when the executive director finds this thread...

SIrhr

 

[Aries256]

Why am I picturing the OP as a pouty little girl?

 

[sirhrmechanic]

Why am I picturing the OP as a pouty little girl?

I’d say you got that about right…

There is a Long Duck Dong joke in there somewhere…

Sirhr

 

[Bender]

 

[BullGear]

Haha....