Caldwell AR-15 Brass Catcher Review - A cheaper alternative

LoneWolfUSMC

Lt. Colonel
Full Member
Minuteman
Jan 9, 2008
7,377
17
Southern Indiana
www.8541tactical.com
The Caldwell AR-15 Brass Catcher is a nylon and mesh bag that attaches to the side of your AR-15 by a velcro strap. It keeps its shape by means of a metal wire inner frame. However the frame only keeps the mouth of the bag open. It does nothing to support the top of the bag. Initially the bag works well in catching brass ejected from the rifle. As the bag fills it becomes heavier and pulls down the top of the bag. This can block the ejection port of the rifle. Additionally as the bag’s weight increases, the frame of the bag is pulled down. Cases can then fall between the rifle and bag.

The bottom of the Caldwell AR-15 Brass Catcher is a nylon mesh. This works well in allowing the cases to cool. The heat of the cases during rapid fire can cause a problem. As we neared the end of fast strings of fire we noted that the cases from our 7.62mm AR were sticking to the mesh. It seemed that the cases were hot enough to come close to melting the mesh. I could not see any damage to the bag, but we were not running the gun extremely hard either.

The bag can be quickly emptied by opening the zipper located at the bottom of the bag. As with any brass catcher, the device should be fully removed in order to confirm that the rifle is unloaded and clear of any live ammunition.

Overall the Caldwell AR-15 Brass Catcher is a low cost solution to chasing your brass down the firing line. It isn’t perfect, but well worth the $13 purchase price.

Caldwell AR-15 Brass Catcher Review | 8541 Tactical

Caldwell AR15 Brass Catcher Review - YouTube