CZ 452 American 16in Stock?

[ejd049]

I am looking for a aftermarket stock for a CZ 452. Does anyone have a source?


Thanks

 

[J.Boyette]

Re: CZ 452 American 16in Stock?

Here you go

<span style="font-weight: bold">Click on the Pic</span>



It took me a month to get the inlet right. BUT I SUCK at working with wood!!!!!!!!

I am so bad, that hanging a door in my house takes a week ok. so this inlet was a BITCH!!!!! for me to do. but its done now.

John

 

[jasonk]

Re: CZ 452 American 16in Stock?

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: J.Boyette</div><div class="ubbcode-body">It took me a month to get the inlet right. BUT I SUCK at working with wood!!!!!!!!
</div></div>

I'd say so....you inlet the bolt on the wrong side!

Nice work, Mr. Boyette, looks great.

J

 

[J.Boyette]

Re: CZ 452 American 16in Stock?

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: jasonk</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: J.Boyette</div><div class="ubbcode-body">It took me a month to get the inlet right. BUT I SUCK at working with wood!!!!!!!!
</div></div>

I'd say so....you inlet the bolt on the wrong side!

Nice work, Mr. Boyette, looks great.

J </div></div>

Here is the "rest of the story"

This took a full month to do all by my self

The first lesson learned is, I have no wood working skills at all!!!! I had to inlet this stock from nothing, I got it to fit, but boy oh boy, was it not fun!!!!

Anyhow these are the basic spec's

CZ 452 LUX 22lr left handed action
Sightron S-I 3-9x40
CZ factory Rings
Sharp Shooter Supply MTR Stock
Home Made Sling that is as good a the $60 slings for a 22lr

Links to all parts

http://cz-usa.com/products/view/cz-452-lux/
http://www.natchezss.com/product.cfm?contentID=productDetail&prodID=SH300140&src=tpCtg
http://www.midwayusa.com/viewProduct/?productNumber=298472
http://www.sharpshootersupply.com/MTR_Stock.html

I used up two small size things of Marine Tex. The first one was to bedd the action. It took that much for it to fill in the "holes" in the inlet. " did I talk about how little skills I have?"

The other box of Marine Tex went to the texture on the stock.

READ HERE -----> http://www.snipercentral.com/forums/viewtopic.php?t=15000&start=0

With a 150yd ZERO on the scope I can Mil hold from 25yds to 225yds. So this works for me. The Bi-Pod is coming off, I am going to use this as a sling rifle only.

John

 

[HotRod9mm]

Re: CZ 452 American 16in Stock?

Very nice work JB, it looks like it paid off. I picked up the
stock below off of GB. It was inletted for a BRNO #1 so
fitting the CZ Style was easy, less then 1hr.

 

[J-Hon]

Re: CZ 452 American 16in Stock?

McMillan has them....

 

[TonyC]

Re: CZ 452 American 16in Stock?

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: HotRod9mm</div><div class="ubbcode-body">Very nice work JB, it looks like it paid off. I picked up the
stock below off of GB. It was inletted for a BRNO #1 so
fitting the CZ Style was easy, less then 1hr.

</div></div>


Is that an extended base you have on there Bob?

Any plans to produce? You could put me down for an extended 20MOA if you do !

Cheers

Tony

 

[HotRod9mm]

Re: CZ 452 American 16in Stock?

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: TonyC</div><div class="ubbcode-body">.... Is that an extended base you have on there?....</div></div>

Yes, I modified one of the Anschutz 64 rails to fit the CZ. If I do make them It won't need to be as tall.

 

[stmcelroy]

Re: CZ 452 American 16in Stock?

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: J.Boyette</div><div class="ubbcode-body">Here you go

<span style="font-weight: bold">Click on the Pic</span>



It took me a month to get the inlet right. BUT I SUCK at working with wood!!!!!!!!

I am so bad, that hanging a door in my house takes a week ok. so this inlet was a BITCH!!!!! for me to do. but its done now.

John </div></div>

I like that, makes me want to grab a CZ452 and get to work.