CZ452 Need Good 1" Scope

[whatsupdoc]

Ok so I have a CZ452 that came engraved with engraved rings. I currently have a very old B&L Bushnell 4x12 with a BDC dial on it. Although the scope is not half bad and been on a half dozen rifles without the slightest issue I really do not trust the elevation dial.

So what can I get in 1" with Parallax and able to dial turrets.

 

[diverdon]

https://www.eurooptic.com/swarovski-z3-rifle-scope-4-12x50-brh-59026.aspx

I have a Ruger #1 with 1" rings, I put a Swarovski on it and never looked back.

 

[OG10]

What is your intended use for the rifle and scope ?

 

[whatsupdoc]

Steel plates at maybe 150 max plus target no hunting.

 

[HayStax]

I just bought a Meopta for mine, mostly because it was made in CZ too?

Meopro 4-14x44 from SportOptics.

 

[whatsupdoc]

I just bought a Meopta for mine, mostly because it was made in CZ too?

Meopro 4-14x44 from SportOptics.

Never knew that they make the parts in CZ and assemble in NY.

 

[OG10]

Weaver 3x10 tactical should work if only going to 150 yards , vortex razor hd lh is my new choice soon as I get time I'll go shoot it and let you how it does. And the above mentioned scopes are also great options. As always usage , budget , are always important considerations. Good luck ps I really enjoy both my cz 452's I'm sure you will also.

 

[steve123]

Ok so I have a CZ452 that came engraved with engraved rings. I currently have a very old B&L Bushnell 4x12 with a BDC dial on it. Although the scope is not half bad and been on a half dozen rifles without the slightest issue I really do not trust the elevation dial.

So what can I get in 1" with Parallax and able to dial turrets.

This is the best 1" scope I've found as far as having a good reticle and focusing close.

https://athlonoptics.com/product/rifle-scopes-argos-4-20x50-ahmr1-sfp/

 

[D_TROS]

I have an old zeiss 4-14 with target knobs that I really like. Tracks great. With a 20moa base was able to max out the elevation. Think I have 14 mils of ele in scope.

Or step it up and get a used XTR2 or H2DMR or SWFA for the $800 mark.

GL!
DT

 

[isofahunter]

Bushnell Rimfire is a great scope for the money the downside is regular duplex. I have one on a Kimber HS and it regularly goes out to 300, on known plate size you can figure the wind and hold but it is not ideal. But my hunting rifles have duplex so good training for hunting rifle use. I am having a 22LR built and will be putting a NF on it to match my 6.5 and 308.

 

[Fret]

The Vortex Razor HD LH 3-15x42 has a 1" tube and parallax down to 20 yards. I like the G4 reticle and the light weight and have it on my .22 rifle.

 

[DXT_Shooter]

I have a Leupold VX2 6-18x40 with CDS and windplex reticle it will focus down to about 20 yards and I had the turret made for Wolf Match Target with a sight in of 50 Yards. It’s a nice scope and would suit your type of shooting.

I just upgraded to a Sightron SIII 10-50x60 because I like to shoot toothpicks, matches and playing cards and need high power.

 

[CarbonMTN]

https://www.redfield.com/_media/downloads/Revolution-TAC_3-9x40_scope.pdf

I just put this on my 10/22 and its great. clear glass, great price, and its works for the type of comps i do.