what do you guys think of the following data cards? they were compiled using Berger bullets software. this data is for 155.5 bergers at 2950ft/s load. its simple find the value in the table and add or subtract from the original dope. If you compare them to your ballistics software, they should match precisely.
example: standard correction (15deg. celcius,29.92inHg) is 8.9mils
in a 35degree celcius temp with 28.05 inHg and 10 degree angle:
8.9 -0.4,-0.4,-0.1 = 8.0Mils correction
no pda necessary
I ran the lapua ballistics application using 155 scenars instead of 155.5bergers and the results are the same.
example: standard correction (15deg. celcius,29.92inHg) is 8.9mils
in a 35degree celcius temp with 28.05 inHg and 10 degree angle:
8.9 -0.4,-0.4,-0.1 = 8.0Mils correction
no pda necessary
I ran the lapua ballistics application using 155 scenars instead of 155.5bergers and the results are the same.
