The wait was worth it!! Here is my completed Deviant (Animal chambered) build.
Defiance Machine Deviant action armor black cerakoted, with ionbonded bolt and Badger Ord bolt knob
Krieger 8.5 twist 6.5 barrel, #7 contour chambered in .260 Rem Match, 26" finish
KMW Sentinel stock
Premier 3.5x15x50 scope in Badger Ord rings
Jard trigger
Harris Bipod
deviant_zps53e807d9.jpg Photo by jeducos | Photobucket
The load: Rem brass with i dont know how many firings, 47gr of 4831sc, lapua 139gr scenar and cci br primer. This is my first five shots out of this rifle. Low shot was first. Adjusted to high and right shot. Adjusted to center three shots.
firstfive_zps7e8c7212.jpg Photo by jeducos | Photobucket
Was a little left on those last three, so adjusted a tenth mil right. Next five shots!
secondfive_zps0aea243f.jpg Photo by jeducos | Photobucket
Happy, Happy, Happy!!! Thanks to Francis "The Animal" for the killer thread/chamber/crown job!!!
Defiance Machine Deviant action armor black cerakoted, with ionbonded bolt and Badger Ord bolt knob
Krieger 8.5 twist 6.5 barrel, #7 contour chambered in .260 Rem Match, 26" finish
KMW Sentinel stock
Premier 3.5x15x50 scope in Badger Ord rings
Jard trigger
Harris Bipod
deviant_zps53e807d9.jpg Photo by jeducos | Photobucket
The load: Rem brass with i dont know how many firings, 47gr of 4831sc, lapua 139gr scenar and cci br primer. This is my first five shots out of this rifle. Low shot was first. Adjusted to high and right shot. Adjusted to center three shots.
firstfive_zps7e8c7212.jpg Photo by jeducos | Photobucket
Was a little left on those last three, so adjusted a tenth mil right. Next five shots!
secondfive_zps0aea243f.jpg Photo by jeducos | Photobucket
Happy, Happy, Happy!!! Thanks to Francis "The Animal" for the killer thread/chamber/crown job!!!