Dry fire kit
- Thread starter Hntgriz
- Start date
i'm guessing that having something to allow for a short focal distance is better than being seen using the flagpole ball over the neighbor's biden flag.
Yes, the indoor dry firing kit is an awesome tool. Used it all last winter and really helped.
idts-dryfire.com
IDTS-Dryfire System
Indoor Dryfire Training System consist in a retractable and portable roll banner that you will install at a distance of approximately 12 feet
idts-dryfire.com
I see ordering one of these in the near future, actually tomorrow morning. Learn something knew everyday here.
DFAT is where it’s at. The dude who runs it is fast to respond to emails and gets your stuff out ASAP. I have the gen 1 and 2 models for my optics and they’re great. I prefer the Gen 2 direct thread setup, but either will serve you well. It also comes with a pack of targets.
Last edited:
It allows you to practice building positions/ work on reducing your wobble zone while being able to use the magnification levels you would in a match with only needing 10-12 feet. I personally "design" a stage based on the targets im using and practice building my positions and transitions on the clock. For instance I'll probably grabscreenshots off the ag cup cof and use those to run practice with. My wobble reduced greatly once i started doing this at the low low cost of no ammo. That way when i then go to the range to practice live it's far more productive
Troy has also started offering targets for the NRL22 matches. With targets the appropriate size. .
One you use it you will be able to call your shots when using it. Whether you pulled the shot jersey the trigger or was unstable
One you use it you will be able to call your shots when using it. Whether you pulled the shot jersey the trigger or was unstable
Personal preference. I have a rimfire that specific says nor dry firing unless I remove the firing pin. So you can check with your specific manufacturer
I've always wondered using these short range dry fire kits with something like the MantisX system with inertial sensors. Seems like it would at least have the potential to allow you to very precisely measure "wobble". That way you could play with weights, positions, etc. and very precisely see what is working better. Top archers have been doing this for a couple (or more) decades using laser pointers on stabilizers and video recording their "wobble" on target adjusting bow poundage, grip position, balance, and various other things to minimise their total system movement. You can see it in the sight as well, but it's much less subjective when you are recording it for review on a grid.
The other big advantage I could see is it also tracks movement during/after the shot, which again seems like it would let you adjust your position, equipment etc. to get real time measurable feedback on how well your total system recoil management is. I've always wanted to use it to test muzzle brakes because you get a very detailed precisely measured recoil mattern of barrel movement.
The other big advantage I could see is it also tracks movement during/after the shot, which again seems like it would let you adjust your position, equipment etc. to get real time measurable feedback on how well your total system recoil management is. I've always wanted to use it to test muzzle brakes because you get a very detailed precisely measured recoil mattern of barrel movement.
The mantis x is a cool tool to to use on live fire as well. We've mounted it to the night vision bridge of my MPA
Similar threads
