Rifle Scopes Falcon 4-14 broke

[seafury]

Hey all.

One of the set screws that holds on the windage cap on my Falcon 4-14x44 mil/mil broke in half. Does anyone have a part number or source for these screws? I ordered the scope from Wonder Optics a couple years ago and have been very happy with it. I have tried to contact them but their message box is aparently full. Help a brotha out!

 

[chpprguy]

Re: Falcon 4-14 broke

I would take one of the other screws to a hardware store and match it,
should just be a normal set screw...

 

[head2h2o]

Re: Falcon 4-14 broke

Call another Falcon dealer and see if they can be of any benefit to you.

 

[BobinNC]

Re: Falcon 4-14 broke

Seafury,

Good advice above. A set screw should not be too hard to replace, but it's probably metric thread.

But Falcon scopes are sort of like disposable diapers, when they go shit, you throw them away and buy another........

 

[JFComfort]

Re: Falcon 4-14 broke

Warrenty? I'm sure if its worth sending in if you can do some searching and find a new set screw locally.

 

[fdkay]

Re: Falcon 4-14 broke

You can always send an e-mail to falcon optics.

[email protected]

I sent a question in regards to their new scopes and the response was fast.
They should be able to tell you what size/thread pitch to order.

 

[67rschev]

Re: Falcon 4-14 broke

There was an updated version II on the turrets . The old style used the one screw from the top , and the new style has three set screws from the sides . I would imagine they would send you an updated turret kit for your scope .