Finally gonna try a tuner. Which one?
- Thread starter Jefe's Dope
- Start date
Vudoo/Ace MTU. Whatever thread pitch the TBac Takedown .22 uses. I've direct threaded that originally but stopped shooting the Vudoo suppressed a few years ago.
A .22 can so probably the 1/2-28. I'd try the ATS tuner. It worked well on my 22" MTU. I had mine threaded at 5/8-24.
I use an ATS on my Vudoo with the 22” MTU Ace barrel. It works well with mine.
I put an ATS on my sons Vudoo, have a Harrells on mine. The Harrells is easier to make fine adjustments. IMO But the ATS works just as well and I like that it doesn’t hang as far out off the end of the barrel.
EC tuner gen II is what I put on my vudoo. No set screw easy to adjust.
That's what I like about the ATS on rifles that are already threaded. It also allows you to put ona brake or suppressor or anything else you want to the muzzle.
I have an ECV2 on my 1.2" straight contour barrel Vudoo and like it a lot in that set up but for an already threaded MTU I would go ATS between the two.
NM, I just watched his installation video and see the adapter I would need.
Last edited:
You need an adapter for the ec tuner if you have 1/2-28 threads. He sells them on his website. If my ec tuner wasn’t direct threaded to my barrel I’d give it to you. It doesn’t work…..
Can I get you guys to post some more pics? I'm a visual learner.
These tuners are really nice. I had my vudoo threaded 5/8x24 on a straight 1.25 barrel.
Attachments
Can I get you guys to post some more pics? I'm a visual learner.
Buy them all. They all do something different, apparently. All their instructions are different.
A tuner threaded for a tuner threaded for a tuner would create a rifle so accurate, NIST would have to be called in to measure group size!
Sirhr
l have two of this one
Adaptive Tuning System (ATS) - SLIMLINE / HUNTING
5/8x24 Threads - Stainless... its possible to also use a brake with the tuner
also have the EC tuner brake .like them both but 223 's really dont need a
Adaptive Tuning System (ATS) - SLIMLINE / HUNTING
5/8x24 Threads - Stainless... its possible to also use a brake with the tuner
also have the EC tuner brake .like them both but 223 's really dont need a
Attachments
Last edited:
That would be perfect.
Tune the tuner to provide the perfect tune. Can't believe this hasn't been done before.
Guaranteed to make a 1 MOA rifle/barrel a 1/10th MOA shooter after running a ladder with 2 round groups.
Similar threads
