Find this UTV part for me - win a Surefeed USGI magazine!

[TheGerman]

It has to be for a Polaris 900 RZR or could possibly be used on some year of Polaris Ranger.

It's the housing for the side sand filter/pre filter intake. I've searched for it and cant seem to find anything excect the filters that go in it. I'm looking for the black housing.

I have a BNIB tan Surefeed USGI 30 rounder for you if you can find it.

 

[2ndamendfan]

From polaris the black housing is sold only with the rear fender. the grill is sold separate. Your Military version could be different.

Either #1 or #5 here. https://www.genuinepolarisparts.com/oemparts/a/pol/503652e6f870023684116f13/body-rear-rack-fenders

still looking though.

 

[Tim_WNC]

some one gonna get fancy with a 3D printer

 

[TheGerman]

From polaris the black housing is sold only with the rear fender. the grill is sold separate. Your Military version could be different.

Either #1 or #5 here. https://www.genuinepolarisparts.com/oemparts/a/pol/503652e6f870023684116f13/body-rear-rack-fenders

still looking though.

You may be onto something; I was hoping they made them seperately as an insert. The 900/1000 has an all plastic fender/body panel set that for some years is basically just molded in. Whereas mine is metal and would be simplier to find this housing and mount it on the metal as opposed to using the other version where its metal grates with a pre filter behind it.


eta - Looks like its part of #5. Now if we could only find it by itself, it was obviously made at some point.

 

[2ndamendfan]

I think on the consumer RZR that part is riveted in and why it is not sold separate.

 

[TheGerman]

some one gonna get fancy with a 3D printer

If they can make me exact copies for L and R side, I'll take it and even put them up on my site under partners we want to thank.

 

[TheGerman]

I think on the consumer RZR that part is riveted in and why it is not sold separate.

Is it a seperate piece though or is it molded together with the fender/body panel? If its attached but not molded maybe I can find some junk panels from that year range and just remove it.

 

[2ndamendfan]

Polaris MRZR Diesel | Polaris Government & Defense

The MRZR Diesel is an ultra-light turbo diesel combat vehicle perfectly suited for a wide range of tactical missions and certified for V-22, H-53, and H-47 internal air transport.

military.polaris.com

Military stuff looks like not for the average civilian. I just talked to my buddy at Polaris dealer and he can't order parts for the MRZR

could try this.

Contact Us | Polaris Government & Defense

Find email, phone and address information for Polaris Defense. Off-road combat, transport, utility and electric military vehicles designed by Polaris.

military.polaris.com

 

[TheGerman]

Polaris MRZR Diesel | Polaris Government & Defense

The MRZR Diesel is an ultra-light turbo diesel combat vehicle perfectly suited for a wide range of tactical missions and certified for V-22, H-53, and H-47 internal air transport.

military.polaris.com

Military stuff looks like not for the average civilian. I just talked to my buddy at Polaris dealer and he can't order parts for the MRZR

could try this.

Contact Us | Polaris Government & Defense

Find email, phone and address information for Polaris Defense. Off-road combat, transport, utility and electric military vehicles designed by Polaris.

military.polaris.com

Been there, done that. As soon as they find out I'm not calling from DoD with a purchase order they don't want to talk to me.

I originally contacted them about the seats which they didn't want to help me with. Figured out it uses 6x the rear seats and they are simply re-upholstered with the tan synthetic material. So I had them made. Fuck Polaris Defense.

I'm taking all the good stuff from the MRZR4 and changing the stupid shit they did. We're basically making a Mod1 with a 1000cc upgrade at this point.

 

[2ndamendfan]

If they can make me exact copies for L and R side, I'll take it and even put them up on my site under partners we want to thank.

I might know a guy. PM this guy @ricksmunn . He made me a bag rider and it turned out very nice.

 

[2ndamendfan]

Is it a seperate piece though or is it molded together with the fender/body panel? If its attached but not molded maybe I can find some junk panels from that year range and just remove it.

I will see if I can find one to look at. My RZR is an 800 trail model so that does us no good.

 

[Alphatreedog]

PM me the particulars and I'll try . We may actually do DOD work for/with them . If so I know just the engineer to go thru . Any ways I'll give it a shot .

 

[TheGerman]

I will see if I can find one to look at. My RZR is an 800 trail model so that does us no good.

Weird thing with the MRZRs is that they basically used a 900 frame and then put random Polaris parts on them sometimes using Ranger parts or kind of winging it. It's obvious from all that Ive been through with it, that outside the suspension, they really went out of their way to not use any 3rd party stuff.

My biggest surprise is that they haven't built the rear deck with internal air box as a conversion kit for the 900's and sold them.

 

[TheGerman]

PM me the particulars and I'll try . We may actually do DOD work for/with them . If so I know just the engineer to go thru . Any ways I'll give it a shot .

Check your email

 

[hlee]

Know anyone that's oblivious with your model utv??

 

[TheGerman]

Know anyone that's oblivious with your model utv??

And now in English?

 

[hlee]

Know anyone that wouldn't notice a missing part on their utv???

 

[TheBigCountry]

Maybe reach out here and they can dig one up?

Military ATV Parts Company Background 217-254-3620

 

[TheGerman]

Maybe reach out here and they can dig one up?

Military ATV Parts Company Background 217-254-3620

Just sent them an email to see what they can do.

 

[nikonNUT]

Not sure if this would work but here's an after market...

Mod Quad Air Intake Scoop and Vent Kit - AdeptPowersports.com

Scoop and vent design mounts directly to the inner body for a secure fit Designed to increase air flow Pre-filter mounts between the plates to prevent sand or mud

www.2wheelpros.com

 

[1J04]

Is this still available? And if so, pics of Mag please.....