Night Vision focus out of range swarovski 6x24-50 with clip-on FXQ55 pulsar

[edwood G]

hello
I had mounted a nightvision clip-on to a scope 6x24 , but the displayed menù pulsar showed in ocular lens is out of range. I think this issue is caused from magnification ring of scope that it's more big moltiplier about the specs of fxq55.. the FXQ55 required a max magnification ring scope up to 5x, the my scope have a 6x to end.
do you have some good idea to reduce the magnification among ocular lens and projected menù of clip-on, because it will can displayd fine ?

 

[MarinePMI]

I think you're just going to need to run a scope that has 5x or lower magnification.

Perhaps others with more experience can chime in. Since you're in Italy, there may be a language issue; so ask if it doesn't make sense to you.

 

[edwood G]

I think you're just going to need to run a scope that has 5x or lower magnification.

Perhaps others with more experience can chime in. Since you're in Italy, there may be a language issue; so ask if it doesn't make sense to you.

thanks for your fast reply,, this is a way more easy but the more expensive ,,, maybe someone could have tried to make an adapter or other diy ..
true I understand that I do not write fine in your language, but if someone will not understand I can be more clear

 

[PlinkIt]

In order to see the menu options and the lower graphics on the fxq50 I needed like a 2-2.5 minimum scope power. The unit will work fine at 6x but you will need substantially less magnification to see all the graphics at the bottom of the screen as well as all the menu options.

When it's in clip-on mode I believe the main menu came closer to center which should help some though... The lower graphics will still be way out though

The unit I had worked well with a 2-10x40 and if you can abandon the objective mount you can move to a 1-6 type scope which works well. The 1.5-6 scopes with the larger objective will let you stick with the objective mounts as well.

Be aware the objective mounts move a little bit, and that's why I moved over to the rail mount.

 

[Prebanpaul]

I use the fx38 I am running it with an 4x acog. I can't see the dislpay but it works fine. I will be putting a NXS 2.5x10x 32 soon on it.

 

[edwood G]

In order to see the menu options and the lower graphics on the fxq50 I needed like a 2-2.5 minimum scope power. The unit will work fine at 6x but you will need substantially less magnification to see all the graphics at the bottom of the screen as well as all the menu options.

When it's in clip-on mode I believe the main menu came closer to center which should help some though... The lower graphics will still be way out though

The unit I had worked well with a 2-10x40 and if you can abandon the objective mount you can move to a 1-6 type scope which works well. The 1.5-6 scopes with the larger objective will let you stick with the objective mounts as well.

Be aware the objective mounts move a little bit, and that's why I moved over to the rail mount.

 

[edwood G]

ok,, so the alone issue will be the magnification moltiplier ?
But about the precision of the point of impact there are no problems of skew of image among lens scope and lens of clip-on visor ?

 

[edwood G]

ok,, so the alone issue will be the magnification moltiplier , but about the precision of the point of impact there are no problems of skew of image among lens scope and lens of clip-on visor ?