Accessories For sale: Desert Tech SRS-A2 Carbon fiber rail

[Jrtex]

For sale is my custom Desert Tech SRS-A2 carbon fiber rail. Can accept integral suppressors with a 1.5” OD
$250 each
I have tons of them available.
They are 3.5-4 oz lighter than OEM, (you can feel the deference free shooting the rifle)
Much more sturdy, very little play when weight is put on the barrel pushing down. (increasing off the bipod accuracy in my testing)
Much nicer to hold, especially when it is cold.



View attachment 8252971

 

[Jrtex]

Bump

 

[tcamel4]

So you can fit an omega 300 under it on a 16.5 in barrel?

 

[Jrtex]

So you can fit an omega 300 under it on a 16.5 in barrel?

The omega 300 fits, but it is close making contact the with rail under recoil. (see photos below)
You could try shaving the top side of the rail to get more clearance.
These rails are ALOT more sturdy and move very little compared to the OEM rail. I have also recorded better accuracy off the bipod. My same handloads went for .3moa 3 shot groups down to .15 moa
It’s also just a lot better feeling when handling the gun.

 

[Jrtex]

bump

 

[SupressYourself]

If I had an A2, I'd be on this like stink on a monkey. Sadly, I'm a lefty, and stuck with the A1...

 

[Jrtex]

If I had an A2, I'd be on this like stink on a monkey. Sadly, I'm a lefty, and stuck with the A1...

Seems I would sell A1 hand guards 5-1 compared to the A2. Maybe one day in the future I’ll make it.

 

[TEXA$$TEEL]

Seems I would sell A1 hand guards 5-1 compared to the A2. Maybe one day in the future I’ll make it.

Put my name at the top of the list for an A1

 

[Jrtex]

bump

 

[Flyperk]

Me too…… A1 owner

 

[SmimL7]

I’d also like to see an A1 version

 

[Jrtex]

So you can fit an omega 300 under it on a 16.5 in barrel?

I did this to one of the rails to fit larger cans. If you are interested in it. DM me. Getting photos of an 18” 6.5 cm with a Dilligent defense enticer S (1.625”) OD inside of it hopefully Wednesday.

As of now, this is the only option for these rifles if you want a full length rail with a suppressed covert A2.

 

[tcamel4]

I'll DM you. I'll check which barrels I'd want to run with suppressors. My KG R30 is actually 1.75 I think so Im breaking the rules again haha. R6.5 works fit though... And I have a 18.5in 6.5cm barrel too.

 

[Jrtex]

I'll DM you. I'll check which barrels I'd want to run with suppressors. My KG R30 is actually 1.75 I think so Im breaking the rules again haha. R6.5 works fit though... And I have a 18.5in 6.5cm barrel too.

My non-modified rail would be perfect for the 18" 6.5cm with the R6.5. To fit the R30, would need to trim off the top.

 

[Jrtex]

Bump

 

[sdman11890]

The ink there is a way to get one to work with the solid top rail?

 

[Shortdraw]

In for an A1 if ever made available

 

[Jrtex]

bump

 

[kekbutwhy]

Howdy jrtex,

Any chance these are the same handguard?

Desert Tech SRS-A2 over sized rail | JTsimperialhemp.com

This is the first and only oversized rail for a Desert Tech SRS-A2 rifle (will not fit the SRS-A1)This rail will accomidate any suppressor with a diameter of less than 1.79" depending on the use of M-Lock nuts/bolts for rail accessories. If you use a rail accessory with a suppressor that has a...

www.jtsimperialhemp.com

The stated inside diameter is different from what you measured, but I can't imagine too many carbon a2 handguards are floating about

 

[Jrtex]

Howdy jrtex,

Any chance these are the same handguard?

Desert Tech SRS-A2 over sized rail | JTsimperialhemp.com

This is the first and only oversized rail for a Desert Tech SRS-A2 rifle (will not fit the SRS-A1)This rail will accomidate any suppressor with a diameter of less than 1.79" depending on the use of M-Lock nuts/bolts for rail accessories. If you use a rail accessory with a suppressor that has a...

www.jtsimperialhemp.com

The stated inside diameter is different from what you measured, but I can't imagine too many carbon a2 handguards are floating about

yes that is me.

 

[scotchcrow]

I'll take one.

 

[Jrtex]

I'll take one.

DM me, and i will send you the payment info.

 

[scotchcrow]

Do not buy from this guy. He will take your money and not ship giving excuses. Total scam.

 

[anhnguyen]

Id like one for the A1 as well...

 

[Flyperk]

Anyone have a drawing of the A1 handguard?

 

[CasperTheFriendlyGhost]

Do not buy from this guy. He will take your money and not ship giving excuses. Total scam.

I didn't have that experience. I bought one from him and it was shipped promptly with no issues.

 

[Beasler1]

I'd take and A1 version, also. Willing to pay top dollar for the weight reduction.

 

[1badbarrel]

Another for the A1.

 

[Jrtex]

Do not buy from this guy. He will take your money and not ship giving excuses. Total scam.

WHAT? You never messaged me after saying you will take one. I never sold you anything. Are you sure somone didnt make an account using my name and then message you?
someone tried that with me for a 6.5 cm barrel. send me the screen shots of the messages you had and of the actual profile.

 

[Jrtex]

Do not buy from this guy. He will take your money and not ship giving excuses. Total scam.

someone has been on the hide making fake profiles with the EXACT user name and messaging people pretending to be the one selling the item.
I commented on a guy named PANDT (or somthing like that selling an A2, with multiple barrels saying i will take his 6.5 CM barrel) withing a few minutes i got a DM by somone named PANDT. He asked how much i wanted to pay for it. i low balled him, expecting a counter offer. he said its yours. i found that suspicious. Clicked on his profile and he had made the account like 2hrs prior. with no reviews. i go to the orginal posting accounts page and it shows he had like 20+ positive reviews ect, and was a member since like 2009.

sounds like somthing like that most likely happend. Prove it to me that is what happend, and i will hook you up. with a rail.

 

[scotchcrow]

someone has been on the hide making fake profiles with the EXACT user name and messaging people pretending to be the one selling the item.
I commented on a guy named PANDT (or somthing like that selling an A2, with multiple barrels saying i will take his 6.5 CM barrel) withing a few minutes i got a DM by somone named PANDT. He asked how much i wanted to pay for it. i low balled him, expecting a counter offer. he said its yours. i found that suspicious. Clicked on his profile and he had made the account like 2hrs prior. with no reviews. i go to the orginal posting accounts page and it shows he had like 20+ positive reviews ect, and was a member since like 2009.

sounds like somthing like that most likely happend. Prove it to me that is what happend, and i will hook you up. with a rail.

Wow. Sadly looks like my bad. They created a JRTEX. (note the extra period at the end.) and direct messaged me. That is something Sniper's Hide needs to get on as that should not be allowed!

 

[Beasler1]

Happened to me over the weekend. They sent me a PM after I posted I would take an item. The PM profile looked exactly like the OP profile, except I didn’t look closely enough and missed the period …. They gave me a bogus PP FF address and I sent them my money. Total scam.

 

[FranzAM]

If the rail is still available, I would be interested. Is shipping to Germany possible?

 

[TEXA$$TEEL]

Put my name at the top of the list for an A1

Are you making these for the A1 now?

 

[Jrtex]

bump

 

[Beasler1]

Count me in for an A1 rail .....

 

[Jrtex]

bump.

 

[Flyperk]

bump.

I didn’t see an answer so, are you making these for the A-1?

 

[Jrtex]

I didn’t see an answer so, are you making these for the A-1?

not right now

 

[Flyperk]

I didn’t see an answer so, are you making these for the A-1?

Thanks for responding

 

[bigwatchpilot]

Buy with confidence...great product by someone that put a lot of time and effort into the design. Best upgrade to my A2 I have done. Perfect for my short 16" 6.5 with TBAC can. Very solid mounting and my support hand does not get cold when hunting. (yes I take my gloves off...how else would I use my phone while texting my buddies).

I purchased almost 1.5 years ago as soon as it was available. Well worth the full price...at this discount it is a no brainer just to try, and it looks cool so I shoot better.

BWP

 

[Beasler1]

Still willing to pay top dollar for one of these for my A1 ….

 

[Jrtex]

Buy with confidence...great product by someone that put a lot of time and effort into the design. Best upgrade to my A2 I have done. Perfect for my short 16" 6.5 with TBAC can. Very solid mounting and my support hand does not get cold when hunting. (yes I take my gloves off...how else would I use my phone while texting my buddies).

I purchased almost 1.5 years ago as soon as it was available. Well worth the full price...at this discount it is a no brainer just to try, and it looks cool so I shoot better.

BWP

Thank you for the review! Eveyone seems to love these rails who buys one. Just hard to get buyers for them it seems.

 

[Jrtex]

Bump

 

[Jrtex]

bump

 

[anhnguyen]

still hoping for an A1 for my lefty self, almost a year since my last bump

 

[Jrtex]

still hoping for an A1 for my lefty self, almost a year since my last bump

Sadly, I have not had much success with these. I am not seeing anything in the future at this point with these rails.

 

[robertsma]

Are these still for sale?

 

[jmanciniii]

Interested

 

[Jrtex]

Interested

PM me!