Accessories Found small milling machine
- Thread starter jcmullis2
- Start date
Check offerup and CL
I scored a 12”x36” grizzly combo gunsmith lathe mill w/ dro local on offerup over the summer I picked up for $2500 with some random tooling from a small business that folded after c19
I scored a 12”x36” grizzly combo gunsmith lathe mill w/ dro local on offerup over the summer I picked up for $2500 with some random tooling from a small business that folded after c19
That’s a damn good deal but I wasn’t fortunate enough to find anything like that.
I went ahead and pulled the trigger on some cheap Chinese equipment. I figured it’s good enough to do the little things I need and the cnc conversion won’t cost to much. It’s a Precision Mathews pm-25mv but it was back ordered and should be here in about a month. I also got a lathe that’s separate from the mill. It’s bed is only like 27 inches but has a 1.5” spindle bore so I can thread barrels if I don’t push it too hard. I didn’t wanna get old American equipment because of the size. I only have a small room for this stuff or I’d have to give up my garage and work in the Florida heat and humidity. I heard good things about grizzly and precision mathews but the precision mathews looked like the way to go for me. Thank you for responding
Accessories - WTS/WTT: Precision Matthews PM836-S knee mill
I will be happy to get better pictures for you if you’re interested. It’s under power and still bolted to the pallet for it. The mill has less than 4 hours total on it. Has a no name 6” vise on it. Complete collet set, drill chuck, clamp set, and VFD come with it. clean machine, no issues. I...
www.snipershide.com
@THEIS
I know I let you down last year when that munitions manufacturer sold out.
I remember... two days too late.
So, to make up for that, I located this:
Just in case you need something a little bigger for those stubborn projects.
I know I let you down last year when that munitions manufacturer sold out.
I remember... two days too late.
So, to make up for that, I located this:
2008 Hankook Dynaturn 2600 X 6000 CNC Lathe (#3918) - tools - by...
Flatbed 102.4” X 236.22” & 86.6" Swing Over the Cross Slide, 250 RPM Max Spindle Speed with a...
tampa.craigslist.org
Just in case you need something a little bigger for those stubborn projects.
That’s a good looking mill. It’s too big for my space. It definitely would have been nice to have bought yours. Thank you just the sameAccessories - WTS/WTT: Precision Matthews PM836-S knee mill
I will be happy to get better pictures for you if you’re interested. It’s under power and still bolted to the pallet for it. The mill has less than 4 hours total on it. Has a no name 6” vise on it. Complete collet set, drill chuck, clamp set, and VFD come with it. clean machine, no issues. I...www.snipershide.com
