Trying to get my reloading room tidied up so letting go of stuff I no long need. All prices are shipped.
Dillon 550 Toolheads
* 4 billet Whidden, 2 standard Dillon
* 5 have a roll pin for floating dies (like a Whidden), 1 is clean - the roll pins could probably be removed with a judicious amount of extraction force via pliars
* They have permanent writing on them or tape to denote what they had setup in them.
Billet - $30/ea ($90 for all)
Steel - SOLD
Lock-n-load bushings - 12 of them - $60
Die Lock Rings
* oring rings style lock rings (6) - $30
* random rings with a floating hole drilled (2)...pretty sure they're Forster...if you grab a set of the above rings and want these i'll throw them in
Redding Competition shell holders - #10
Used for maybe 100 rounds
$55/ea
Dies (most dont have deprime pins):
Standard RCBS 223 - $30
Standard RCBS 308 - $30
Redding 223 Remington FL Sizing die (NON bushing die) - $60
Redding 6.5x47 Lapua FL Sizing die (currently has 280 bushing...if you want a different bushing size lemme know as i have an assortment for 6.5) - $70
Redding 6.5x47 Lapua FL Sizing die (no bushing but i have an assortment for 6.5 so lemme know what you want and i'll see if i have it) - $70
Lee Collet 308 die set - $30
Forster 6x47 die (never used) - $40
Harrels 6bra (havent found the deprime setup but i'll keep looking - lemme know what bushing you want and i'll see if i have it) - $80
Whidden 6mm seater (bought for a 6 commet but used for several BR variants) - $OLD
Wheeler scope level tool -- never used -- $OLD
ColeTac Tripod Leggings and tray - $OLD
TAB Gear tripod tray with no leggings - $OLD
Message me with any questions. I take payment via Paypal F&F or the buyer pays the fees.
Dillon 550 Toolheads
* 4 billet Whidden, 2 standard Dillon
* 5 have a roll pin for floating dies (like a Whidden), 1 is clean - the roll pins could probably be removed with a judicious amount of extraction force via pliars
* They have permanent writing on them or tape to denote what they had setup in them.
Billet - $30/ea ($90 for all)
Steel - SOLD
Lock-n-load bushings - 12 of them - $60
Die Lock Rings
* oring rings style lock rings (6) - $30
* random rings with a floating hole drilled (2)...pretty sure they're Forster...if you grab a set of the above rings and want these i'll throw them in
Redding Competition shell holders - #10
Used for maybe 100 rounds
$55/ea
Dies (most dont have deprime pins):
Standard RCBS 223 - $30
Standard RCBS 308 - $30
Redding 223 Remington FL Sizing die (NON bushing die) - $60
Redding 6.5x47 Lapua FL Sizing die (currently has 280 bushing...if you want a different bushing size lemme know as i have an assortment for 6.5) - $70
Redding 6.5x47 Lapua FL Sizing die (no bushing but i have an assortment for 6.5 so lemme know what you want and i'll see if i have it) - $70
Lee Collet 308 die set - $30
Forster 6x47 die (never used) - $40
Harrels 6bra (havent found the deprime setup but i'll keep looking - lemme know what bushing you want and i'll see if i have it) - $80
Whidden 6mm seater (bought for a 6 commet but used for several BR variants) - $OLD
Wheeler scope level tool -- never used -- $OLD
ColeTac Tripod Leggings and tray - $OLD
TAB Gear tripod tray with no leggings - $OLD
Message me with any questions. I take payment via Paypal F&F or the buyer pays the fees.
Attachments
Last edited: