Firearms FS: Winchester 70 CRPF 7mm WSM.... SOLD

[chrisj]

Winchester 70 with controlled round push feed action in 7mm WSM. 24" bbl. I only shot Hornady 139's at 2800 and it shot sub Moa. Rifle is in VG condition and bore looks great. I have about 100 pcs of brass that can be sold with the rifle at addition cost. approx 75 new pcs and 25 once fired with light loads.

$350 + shipping
Tikka t3x non magnums accepted in trade
[email protected]
Thanks

 

[jfjohn77]

So which is it? Controlled round feed or Push feed? Photo appears to be Push Feed.

 

[chrisj]

It's exactly what it says. It is not the standard win 70 push feed a d does not have the claw extractor. As soon as the bolt face makes contact with the case rim.. it grabs the rim a d holds the cartridge all the way into the chamber. You can google it. Est of both worlds and I've owned many model 70s

 

[chrisj]

It's exactly what it says. It is not the standard win 70 push feed a d does not have the claw extractor. As soon as the bolt face makes contact with the case rim.. it grabs the rim a d holds the cartridge all the way into the chamber. You can google it. Est of both worlds and I've owned many model 70s

 

[Iamero]

Those CRF PF actions are few and far between but are absolutely awesome! For $350 you are getting a sweet action to build on!

 

[chrisj]

Top boltface push feed
2nd boltface controlled round claw extractor
Last boltfacecontrolled round push feed.

 

[Toftwo]

What’s the measurement between the action screws? Will this action / bottom fit a short action stock, or are the wsm’s a different length?

 

[Iamero]

WSMs are same length as short action on the Winchesters. No intermediate actions there.

 

[hafejd30]

Better pic of the one posted above by OP. I own a M70 coyote lite in 325 WSM with the same action. One of the best and smoothest actions I own. GLWS

 

[jfjohn77]

Well, I apologize for my Ignorance. I learned something.

 

[chrisj]

No worries at all. At least you learned something!

 

[kcgrendel]

So can you load without having to push the round into the blind box?

 

[FCS]

So can you load without having to push the round into the blind box?

Yes, possible to load rd into chamber w/o pushing rd into magazine.
If rd feeds from magazine, extractor will control rd like a CRF.
If feeding from setting rd on top of follower, extractor slides to snap over rim like a push feed.

See diagrams and descriptions above in post #9 by hafejd30.

 

[chrisj]

SOLD