GAP10 Gen 1 BCG Parts

[c4xplsv]

Does anyone know what BCG parts kit is compatible with the GAP10 Gen 1 rifles? My firing pin retaining pin is bent and it appears to be the same diameter (albeit shorter) as the normal AR15 and the AR10 replacement I ordered is too large (thicker). These rifles were built on the hogan receivers at one point if that helps. Thx

Current (Top)
AR10 (Middle)
AR15 (bottom)

 

[Bigjake83]

The used Armalite BCG's

 

[c4xplsv]

Ah yes, vaguely remember that detail now that you mention it. thank you.

 

[LRRPF52]

Do you have a sprung firing pin in your BCG?

If so, it’s an ArmaLite.

KAC is now using sprung firing pins in the newer SR-25s, and Savage uses them in the smaller frame MSR-10.

 

[c4xplsv]

Yes it’s a sprung firing pin. The weird part is the retaining pin - it’s small diameter like an AR15 but AR10 length. But yes, ArmaLite rebuild kit matches what I have.