Firearms Glock 17/34 Longslide Custom IPSC 3 Gun Pistol TTI, ZA, Timney

[buffalowinter]

$1200

This is a custom Glock 17/34 Long slide 9mm pistol. Gen 3. The lower receiver is a Glock 34l. It has had the finger grooves removed and a TTI type stippling applied. There is a TTI competition mag well and a Timney Gold Alpha trigger set at 3 lbs. The slide is a Zaffiri Precision ZPS.3 for Glock 17l to take advantage of the longer barrel than the 34L. The barrel is a Zaffiri Precision Gold TiN ported:

Zaffiri Barrel Specifications
Compatible for Glock® 17L (LONG) Gen 1-4 ($180)

• Length: Flush and Crown – flush with end of slide / inward “crown” shape
• Twist: 1/10
• Quality: 416R Stainless Steel
• Polished feed ramp for easy feeding
• Target crown and oversized lock up area
• Stress relieved and heat treated to RC 40-42
• Made to work with Lead, plated or jacketed ammunition
• Large “ZP” Logo machined on the Port Side of the lockup.
• Made in the USA

The slide is a Zaffiri Precision ZPS.3 slide ($370)
Our single billet 17-4 stainless steel slides are made with tight tolerances that allow an increase in accuracy and performance. 100% American made and manufactured at our facility in Largo, FL. These are among the best aftermarket slides available for Glock. This slide is pre-cut and pre-coated and no changes can be made. Please see our Custom Line if you’re looking for different optic cuts or color options.

Compatible with and designed to fit Glock 17 – Gen 3 and other 17 / 17L / 34 frames Gen 1-3.​

Features:​

• 100% made in the USA
• Machined from billet 17-4 Stainless Steel
• Slide Model: ZPS.3 (Long)
• Optic Cut – Trijicon RMR / SRO and Holosun 407c / 507c
• This Slide is pre-cut and pre-coated
  – Armor Black,
  – Cerakote® Certified Coating Facility –
• Black anodized optics cover plate and screws
• Length: 8.75 inch
• Width: 1 inch
• Height: .855 inch
• Weight: 11.2 oz

Optics Cut (Red Dot Footprint):
Trijicon RMR / SRO, Holosun 407c / 507c, and other popular “RMR footprint” optics – mounting position is in front of the factory location of the rear sight (dovetail remains behind the optic cut).

Timney 3lb Alpha Gold trigger ($170)
Sure, there are plenty of aftermarket Glock®triggers out there, but how many of them are built to maintain the legendary reliability that your Glock®handguns are known to provide? This Timney Alpha Trigger has been purpose-built to give you an enhanced trigger without sacrificing any of the reliability, safety or durability built into your gun. Each Timney Alpha Trigger is purposely designed to maintain the legendary reliability and safety of the Glock®operating system, all while enhancing the trigger pull for greater performance. This trigger includes a Teflon-nickel-treated trigger bar and sear, along with an anodized-aluminum straight trigger blade. The factory-tuned components are built to give you a crisp, clean trigger pull that measures in at three pounds. Other than these components, the Timney Alpha Glock®trigger uses all of Glock's OEM components and springs. The trigger parts are easy to install, so you'll need no gunsmith to enhance your go-to Glock®. You'll be making precision shots in no time. The trigger is designed to fit Gen 3-4 models of the G17, G19, G22, G23 and G34.


The gun comes with a CT RAD red dot sight ($240) The CT RAD™ (Rapid Aiming Dot) Electronic Sight is a full-size Open Reflex Sight for full frame pistols. Featuring a red 3 MOA aiming dot, the CT RAD™ has a recessed and fully multi-coated lens with a large quick acquisition window. The CT RAD™ comes with an AUTO Shutoff Function that automatically shuts off after 8 consecutive hours of operation to conserve battery life and a manual ON/OFF Function that allows you to turn on or off the sight by using the side brightness buttons. The CT RAD™ is easily installed on an optics cut slide using the CT RAD™ footprint that is also compatible with the Docter® footprint. Textured sides allow for a secure grip when racking the slide.

The CT RAD™ has large brightness setting buttons for easy use even with gloves on. Made of 7075 Series Aerospace Aluminum, it is 30% stronger than most industry standard sights made with 6061 Series Aluminum. The entire CT RAD™ family has an Innovative top strap design that deflects force if the sight is dropped. Our engineers developed a better way to reduce stress on the lens of reflex sights. By combining out-of-the-box thinking with next-level physics, we designed a system that both re-enforces your optic and reduces stress if it happens to get dropped. All this comes with our CRIMSON Protect Lifetime Warranty.
Comes with one 16 +2 magazine. Gun is brand new and test fired only. 100% reliable. 100% guaranteed...return for any reason within 5 days for full refund less shipping. Ships FREE PRIORITY mail to your FFL. No sales where prohibited, know your state and local laws.

 

[buffalowinter]

btt

 

[buffalowinter]

btt