Building an AR-10 for gas gun div. Thinking about getting an XTR Pro for the scope. Seeing what everyone uses for scope mounts. I've looked at the JP because they have a 34mm 20moa mount with 4 cross bolts that looked to be pretty rigid. I considered seekins but all of theirs are 0moa. What are ya'll using for long range AR usage?
go to scope mounts for flat top receivers(0 moa)
- Thread starter PRSDietitian
- Start date
Just putting a ZCO in GDI mount
www.snipershide.com
Precision Rifle Gear - We did it ! Reopened GDI QD Mounts
We did it America ! Starting today, November 6th, 2024, we are rolling out our Presidential Election Day Sale! We have a limited amount of each of the P-ROM L-Model variants noted below for the SH community. Mounts will ship in 7-10 business days from purchase. Free Shipping. Only U.S...
www.snipershide.com
I've been using Primary Arms PLx mounts (30mm ) on my AR15's very high quality .
They also make a 34mm 20MOA one, as well as a zero MOA one..
Primary Arms 34mm PLx Cantilever Mount - 1.5" Height - 20 MOA Cant
Primary Arms 34mm PLx Cantilever Mount - 1.5"
They also make a 34mm 20MOA one, as well as a zero MOA one..
Primary Arms 34mm PLx Cantilever Mount - 1.5" Height - 20 MOA Cant
Primary Arms 34mm PLx Cantilever Mount - 1.5"
Last edited:
A419 and gray ops look top notch. I buy from MK Machine sometimes and they sell a brand called Audere and their mounts also look quite nice. Anyone ever used theirs?
the 4x crossbolt design looked really sturdy to me. Right now im weighing pros and cons of that and the Audere Adversus. That one looks as solid as a spuhr but 150 less.
- Apr 17, 2019
- 134
- 87
I've personally used NF, Spuhr, and Badger over the years and they have never failed me. I've got buddies that have ran Reptilia and Geissele and they have been happy with those as well.
350 and under, 1.50 would be ideal for it being on an AR-10. Modularity is less essential because i havent decided to buy an LRF or not
Tons of great mounts in that price range. Primary Arms PLX, Geissele, Badger, Reptilia, NF.
- Nov 3, 2010
- 10,329
- 22,461
I’ve ran Badger(new and old versions), JP, ADM, Geissele, Sphur, and plenty of el cheapos from various manufacturers.
All the higher end ones worked just fine and were more than sturdy enough to handle a large frame
All the higher end ones worked just fine and were more than sturdy enough to handle a large frame
Lots of good options these days. The NF unimount or badger is hard to beat. I used to default to the Seekins MXM as well, but it must be the surface coating they use I find them "sticky" for making fine adjustments when leveling, also their pricing went through the roof the last year. The last one I bought in late 23' was about $175 delivered, they are now $100 more than that, so at the same price as the NF unimount I'd buy that. JP is nice as well, I haven't ran ARC's aside for the individual rings, but I would not hesitate to run them as long as they fit (If I remember right the ring spacing is tight on some scopes). I have a couple Sphur mounts, they are fine, but unless you need to bolt a bunch of crap to your mount for the price there's just so many other good options for less.
Seekins does make a 20 MOA 34mm mount but it's 1.45" but I've put them on multiple AR-10s without issue with the height, but at the current price I'd go with something else.
Seekins does make a 20 MOA 34mm mount but it's 1.45" but I've put them on multiple AR-10s without issue with the height, but at the current price I'd go with something else.
Ideally you want one that will have mounting options for a sent it level and possibly a crush it timer. Also a diving board if you like to rest hand on the top of the optic sometimes.
Spuhr, Grey Ops, A419 would be my top 3. They all have a ecosystem to support this.
Spuhr, Grey Ops, A419 would be my top 3. They all have a ecosystem to support this.
Similar threads
