• HideTV Updates Coming Monday

    HideTV will be down on Monday for updates. We'll let you all know as soon as it's back up and message @alexj-12 with any questions!

  • Win an RIX Storm S3 Thermal Imaging Scope!

    To enter, all you need to do is add an image of yourself at the range below! Subscribers get more entries, check out the plans below for a better chance of winning!

    Join the contest Subscribe

go to scope mounts for flat top receivers(0 moa)

PRSDietitian

Supporter
Supporter
Full Member
Minuteman
Jan 11, 2023
775
363
Texas
Building an AR-10 for gas gun div. Thinking about getting an XTR Pro for the scope. Seeing what everyone uses for scope mounts. I've looked at the JP because they have a 34mm 20moa mount with 4 cross bolts that looked to be pretty rigid. I considered seekins but all of theirs are 0moa. What are ya'll using for long range AR usage?
 
Just putting a ZCO in GDI mount
 
A419 and gray ops look top notch. I buy from MK Machine sometimes and they sell a brand called Audere and their mounts also look quite nice. Anyone ever used theirs?
 
I have that JP Mount and a Geissele Mount.....both GTG.
 

Attachments

  • Screenshot_20250309_133434_Gallery.jpg
    Screenshot_20250309_133434_Gallery.jpg
    575.7 KB · Views: 19
I’ve ran Badger(new and old versions), JP, ADM, Geissele, Sphur, and plenty of el cheapos from various manufacturers.

All the higher end ones worked just fine and were more than sturdy enough to handle a large frame
 
Lots of good options these days. The NF unimount or badger is hard to beat. I used to default to the Seekins MXM as well, but it must be the surface coating they use I find them "sticky" for making fine adjustments when leveling, also their pricing went through the roof the last year. The last one I bought in late 23' was about $175 delivered, they are now $100 more than that, so at the same price as the NF unimount I'd buy that. JP is nice as well, I haven't ran ARC's aside for the individual rings, but I would not hesitate to run them as long as they fit (If I remember right the ring spacing is tight on some scopes). I have a couple Sphur mounts, they are fine, but unless you need to bolt a bunch of crap to your mount for the price there's just so many other good options for less.

Seekins does make a 20 MOA 34mm mount but it's 1.45" but I've put them on multiple AR-10s without issue with the height, but at the current price I'd go with something else.
 
Ideally you want one that will have mounting options for a sent it level and possibly a crush it timer. Also a diving board if you like to rest hand on the top of the optic sometimes.

Spuhr, Grey Ops, A419 would be my top 3. They all have a ecosystem to support this.