Hang Fast Targets T Post SWINGER

[vinconco]

THE HANG FAST SWINGER IS BUILT TO LAST​

https://hangfasttargets.com/​

See our home page for Christmas discount codes!​

[IMG2=JSON]{"data-align":"none","data-size":"full","src":"https:\/\/i.imgur.com\/FsFz1n0.jpg"}[/IMG2]​

Our IPSC AC zone Swinger is designed to slip over a standard T Post with no tools!

The IPSC plate is reversible because nothing is welded to it. Simply unbolt the hanging bracket on the rear and reverse it. The only welds are on the bracket NOT THE PLATE, keeping the integrity of the AR500 intact. Our pivot tubes have a full 16 inches of weld making "break offs" impossible. Other manufactures will weld the tube to the back of the AR500 plate using a few "spots" (to keep the heat down). Some will even guarantee the weld if you send the plate back for repair.....:facepalm: Since we don't weld on the AR500 we can weld this critical component properly making it FAIL SAFE !

Our swinger plates have hand ground pivots to mitigate galling and chatter. The sharp edges on the pivot leg will dig into the softer steel in the pivot tube causing the swinger plate to malfunction after a just a few rounds. By rounding all these contact points we can guarantee a smooth chatter free pivot for the life of the target. No tools needed to change plates. 3 sizes available 4, 6 and 8 inch in 1/4, 3/8 and 1/2 inch AR500.

No heavy bases to haul around and try to stabilize in rough terrain. The T POST will never rock, tilt or fall over!! Leave it in the ground (where possible) and it will be there when you come back because nobody ever steals a T Post.
FYI... We manufacturer the only T Post base on the market and the only target base that is ALL TERRAIN.... and we mean it. See it HERE

Our Swinger Targets are currently available in 1/4", 3/8, and 1/2 inch AR500. See them HERE

[IMG2=JSON]{"data-align":"none","data-size":"full","src":"https:\/\/i.imgur.com\/X6gaiI9.jpg"}[/IMG2]​

 

[Birch Creek]

That’s pretty awesome. I think I need to save the pennies and put one up for my matches.

 

[Maelstrom]

How are the plates cut?

 

[vinconco]

How are the plates cut?

The plates are laser cut.

 

[Alamo]

That all terrain stand looks awesome too, I love the versatility......if I'm seeing it correctly.....the bases nest for storage?????


.....standby for cash transfer.....

 

[vinconco]

That all terrain stand looks awesome too, I love the versatility......if I'm seeing it correctly.....the bases nest for storage?????


.....standby for cash transfer.....

Yes, the bases can nest for storage by removing the adjustment bolts (2) and pivoting the upright down then re-tighten the pivot bolts. This allows them to be stacked.

 

[tnichols]

Looks innovative and well thought out. Nicely done.