Rifle Scopes Have a 700P and need rings, Leu. Mk4 rings work?

JelloStorm

Gunny Sergeant
Full Member
Minuteman
Feb 23, 2010
1,409
4
43
Northeast Pennsylvania
Hey all,

I have a 700P .308 and need scope rings for a 44mm objective. I wanted a set of Larue rings on a 1pc mount but will have to settle for something a bit cheaper and was thinking of the Leupold MK4 rings to cut down costs a little but still get a quality set of rings.

I'm holding out for a Vortex Viper 2.5-10x44mm, which has a 30mm tube so those rings should work right?

There's no weaver mounts on the top of the receiver, just the screws that I have to remove to install the bases.

What particular height rings would I need?
 
Re: Have a 700P and need rings, Leu. Mk4 rings work?

Mark IV's are not cheap rings, if you buy Mark IV base and rings you will spend almost as much as the Larue's. It all depends on what you want, I would urge you to pay once and cry once.

In reference to ring height, Mark IV mediums are lower than LT-719's, the difference comes in the base height. Medium rings will work fine with a 44 mm objective, just make sure you have the approriate rings for the tube, either 30mm or 1".