Help me find this peep sight for an old Remington

[TexAZ]

Trying to help out an old Texas gentleman here. He dropped his Remington .22 target rifle when his wife told him that his mother had passed away. I took the sight in hopes of finding a replacement for him. Here are some pictures. Thanks in advance for any help I may receive.

 

[VoxPatriam]

If just that one spot is broken, a couple tack welds with a tig and some light file work would fix it up good as new. Probably easier than finding a new one. Good luck and good on you for helping the guy out.

 

[TexAZ]

I thought about the tig option, but there is a pin hole drilled 12-6 right where that break is. I don't know if there is a function to the 2 holes on top of the frame, which makes me weary to weld it

 

[n64atlas]

They were used on the Remington model 41P.. one on Ebay now
Remington Model 41P Rear Receiver Peep Sight Rifles Sights or Gun Parts | eBay

 

[168BTHPM]

If you don't get the sight on ebay send me a PM. I have hundreds of sights but they are boxed up and I would need to dig through and see if I have the part you need.

Another good source for sights is Gary Fellers, he has a website to contact him through.

 

[dougfxdl]

Here you go, this is a great source for old/vintage parts
Rear Sight Base Gun Parts | 72740 | Numrich Gun Parts

 

[dougfxdl]

I tried to post this earlier, but it got flagged for moderator approval. Numrich Arms/ Gun Parts Corp is a parts house in NY, shows the sight available for about 22.00

 

[TexAZ]

Y'all are just plain awesome here on the hide. Thank you so much for the help. I will get the sight through Numrich Arms. Fellas, there is going to be one happy, old, Texan cowboy this week when I hand over the repaired rifle to him. THANKS AGAIN!

 

[n64atlas]

Just so you know, there are two versions of this sight. The 41P and the 341P. The only real differance is the 341P sight setts back a little further so the bolt can be removed without undoing the sight. Don't know if Numrich separates these or just sells the one they grab out of a bin.

 

[TexAZ]

Just so you know, there are two versions of this sight. The 41P and the 341P. The only real differance is the 341P sight setts back a little further so the bolt can be removed without undoing the sight. Don't know if Numrich separates these or just sells the one they grab out of a bin.

Thank you! Much needed advice.