Hornady Neck Turn Tool or pma neck turner

Schw15

Longrange
Full Member
Minuteman
  • Jul 21, 2019
    4,513
    1,109
    Colorado
    Has anyone used the Hornady neck turner tool? Opinions? Good results? I really like the easy and setup. But also seems like the pma tool is great options as well. I need to neck turn because neck is to tight for the thicker brass. Not sure which route....... last time I just changed everything instead of neck turning but now I can't get away from it. Not a huge fan of adding it never done it before.
     
    I use less than one tiny drop of Shooters Choice FP10. I don't even squeeze the bottle, just what weeps out of the nozzle when I invert the bottle.

    If you want to get away from oil Redding Sizing Die Wax would work.
    Have that as well. I was thinking the one shot would be easy small spray and go but no experience here
     
    What do you use for lube? I was thinking hornady dry lube? Instead of oil
    This really works well for me, and it's not as messy as oil. Throw them in a tumbler for 15 minutes to take the residue out of the necks. I anneal after tumbling, before the first sizing.
    PMA tool works well for me. Just got done doing 500 cases. Whatever brand you go with, only buy their mandrels so everything stays consistent. Get a good tube mic so you can check for consistency.
     

    Attachments

    • IMG_1555.jpg
      IMG_1555.jpg
      336.7 KB · Views: 77
    This really works well for me, and it's not as messy as oil. Throw them in a tumbler for 15 minutes to take the residue out of the necks. I anneal after tumbling, before the first sizing.
    PMA tool works well for me. Just got done doing 500 cases. Whatever brand you go with, only buy their mandrels so everything stays consistent. Get a good tube mic so you can check for consistency.
    What Mico do you run