-
Having trouble using the site?
Contact support
I’ll just leave this here...
- Thread starter RFutch
- Start date
Doesn’t this guy have clouds to yell at ?
His basic message seems legit- there are some uncommon variables with the 6.5cm that should be taken into consideration, nothing worse than that. I'm a fan of the 6.5cm, and his observations don't change that for me, but I won't dismiss his observations, either.
Last edited:
You know what your suppose to use to clean your 6.5 Creedmoor ?????
His video about the .300 PRC is a good one too, apparently we should all be shooting a .300 Weatherby instead because super expensive brass with an antiquated design and a case length that limits you to stubby bullets in a standard AICS Mag are exactly what we are looking for.
From my understanding he screwed up a build for a customer by using the wrong reamer when the cartridge first came out and has disliked it ever since.
Never trust a gunsmith with a shit-ton of wood chisels in the background.
Interesting... What evidence is that based on? I ask because the video seems to present the fact that he in fact did use a 6.5cm reamer, and he goes into great detail why the screw up is with Hornady. I don't mind calling him out if he screwed up, but he seems to know what he's talking about. Plus everyone litigates these days and I don't want to get sued for slander, LOL!
Watch his video about his radial brakes, he claims there is no "felt recoil" when using it on a 300 weatherby. He demonstrates and it sure looks like he felt some recoil.
I'd rather hang out with buddly. Would be a better use if time...hence why I asked someone who watched it
Meh, it sounds like he got the wrong freebore. It would be interesting to know when he got his first reamer. He makes it sound like he was a early adapter, but then claims he got the reamer same time as ruger offered a factory 6.5creed. I assume hes talking about the rpr, savage had a couple factory 6.5 creeds for 2-3yrs before ruger offered anything. Makes me think he bought a reamer without investigating the freebore.
Theres several freebore options for every cartridge reamer, not sure why hes surprised the creed is different. He seems to have an axe to grind, trying to drum up a conspiracy theory with brass that's a little longer. Omg, that's a first, all virgin brass has always been perfect out of the bag!! I dony know where hornady gets brass, I do know Winchester creed brass is made by hornady, and nosler brass is mostly made by norma.
Theres several freebore options for every cartridge reamer, not sure why hes surprised the creed is different. He seems to have an axe to grind, trying to drum up a conspiracy theory with brass that's a little longer. Omg, that's a first, all virgin brass has always been perfect out of the bag!! I dony know where hornady gets brass, I do know Winchester creed brass is made by hornady, and nosler brass is mostly made by norma.
I wasn't going to respond to this but old farts need to stick together. I can't speak to Selby's current state of mind or what prompted this. The man has forgotten more than most will ever know. He may at some point have decided "I know it all". A fatal error for most professions either in the political or technical world. I spoke with him in the early 90's about wildcatting the 404 Jeffery's case. At that time called the Canadian Imperial Mag. Pre RUM. He had been using it for several years. He shared everything. I went my own direction and developed my own line based on the 404 case. He's old school. We don't have enough Selby's left in the world.
I'll quote from my favorite movie "The Hunt for Red October" and I paraphrase " You might consider cutting the man some slack"
I'll quote from my favorite movie "The Hunt for Red October" and I paraphrase " You might consider cutting the man some slack"
I can’t speak with any certainty on variations within the early 6.5cm brass, but I can say that it was total shit. I had 1000 pieces of it that was what I’d consider trash. If you got back into the archives here, it shouldn’t be hard to find info on this subject. It pissed me off enough that I sold the rifle I had built, all the brass, and dies. Just my one experience and it’s worth exactly what you paid for it......
Personally, I liked 6.5 Creedmoor back when it was called 260 Remington.
Shows up every so often... As near as I can tell he got an out of spec reamer and decided that because some early brass didn't have the anneal mark acid washed off Hornady isn't making their own cases. Guy has it out for Hornady for whatever reason, get that vibe in all his videos...
As far as .007" on head space on cases...
As far as .007" on head space on cases...
Sadly it didn’t... or good brass until like 2011 if I recall, when Lapua started producing it. Got that slight velocity edge over the 6.5CM though!
Agreed. That’s 90% of his complaint, that Hornady brass is shit. Are they having 6.5 CM brass made by Norma now as he suggests? It would make sense to the extent that it is not as shitty as it used to be.
Nope. Far as I'm aware Hornady has always made their own 6.5 cm brass (with rare exception if not). I think some of the early stuff had anneal markings left on. Similar to what you saw in the batches of 6.5 Gap 4s brass, some had anneal marks, some were washed.
He seems to know his way around a gun, and is for sure a well versed wildcatter. His loading for wildcats video I did find helpful. These others... seem more someone frustrating with marketing and venting about it. What I can’t figure out is if so, why does he not order reamers specd how he thinks they should be for these Hornady cartridges that he complains about excessive jump in.
his 300 prc video isjust a rambling about how the 300 weatherby is better and then talks about excessive jump with his saami spec 6.5 prc reamer again.
Last edited:
Why won’t he look at the fricken camera? He might be an idiot savant. Y’all should cut him some slack.
It has a casual shoulder angle.
Not some “look at me I’m a hard gangsta” shoulder angle.
Cant wait for his video on the 6GT. ?
I'm 7 minutes in and can't stand it. He talks too fucking slow.
He stated he had some brass that didn't fit. The brass in both of my CM's fits fine.
Did he just get an out of spec reamer? Did he check this across another 1 or 2 reamers?
He stated he had some brass that didn't fit. The brass in both of my CM's fits fine.
Did he just get an out of spec reamer? Did he check this across another 1 or 2 reamers?
Ok, which one of you twats showed gramps how to YouTube?
That’s what mine is.
Somebody asked me the other day if I was going to get it re-chambered to a Creed- no, just like my insurance I plan on keeping my Brass.
I literally can’t understand the hate for a cartridge. Perplexed. It’s not revolutionary. But Remington sucks at marketing and is run by Fudds. There is absolutely nothing wrong with the .260. The same as nothing wrong with the 6.5 Creedmoor. It’s just Hornady understands marketing and actively put the 6.5 on shelves.
And sorry. Anything past 600yds, the 6.5cm/ .260 kicks the .308s ass.
this guy needs to understand stuff progresses and moves past what he is familiar with. It’s a hard concept for Fudds to grasp.
And sorry. Anything past 600yds, the 6.5cm/ .260 kicks the .308s ass.
this guy needs to understand stuff progresses and moves past what he is familiar with. It’s a hard concept for Fudds to grasp.
For me it’s exactly that - how Hornady marketed it as “look at this new thing in the shiny packaging”. Everyone ate that shit up with zero research or knowledge because, well, it’s Hornady! That’s all fine, I get it. When you have a crafty marketing team it makes all the difference evidently.
I’m a big opponent of “in your face” advertising in general, so my bias cannot be hidden!
I’m a big opponent of “in your face” advertising in general, so my bias cannot be hidden!
On the 260 I’m running a S&B 5-25x H59.
Well not literally everyone but you know what I mean. Let me rephrase actually - a shit-ton of people getting into the caliber, or looking to replace an evil 308 chambering.
Lmaoooooo....
The “H59” and you hate the super marketing?
I guess only when you like it though.
It’s ok. I’m just giving you shit. Lol
The .260 Remington is just another Prime Example of how bad the current, (last 25 years), Remington sucks.
I mean, the twist rates weren’t even what was being used, never mind barrel lengths & projectiles.
Remington had the opportunity to do the right thing but instead left the door open for the 6.5 Creedmoor.
Had they followed the wildcatters of the late 1990s rather than what they did, the Creed would not exist.
But I digress.
Last edited:
Hahaha, I know, I know. I got it on a trade damnit! The TH/Horus marketing wank was strong too back in the day.
I do own a 6.5CM though - just for full disclosure ?
It has a round count of “factory”. Probably give it a try one day after I burn out the 260.
