i bought a remington 700 sps with a Nikon Team Primos 3-9x40mm Riflescope with BDC Reticle 8435 im lookinh to upgrade to better stuff for it just wondering if anyone had suggesting on what i should get,im trying to reach out as far i can with it
i bought a rem 700 sps need help building it
- Thread starter gashooters87
- Start date
Re: i bought a rem 700 sps need help building it
Probably start with a new stock, HS or B&C, and maybe a trigger if you want a lighter pull.
Probably start with a new stock, HS or B&C, and maybe a trigger if you want a lighter pull.
Re: i bought a rem 700 sps need help building it
There are a ton of topics here about the SPS and what folks have done to it. Use the search function and type in SPS Tactical, you'll have a few hours of reading.
Don't forget to fill out your profile to include your actual location.
There are a ton of topics here about the SPS and what folks have done to it. Use the search function and type in SPS Tactical, you'll have a few hours of reading.
Don't forget to fill out your profile to include your actual location.
Re: i bought a rem 700 sps need help building it
Here's what I did to mine. Cut and recrowned the factory barrel. Jim See's level 1 accuracy package.
http://www.centershotrifles.com/
B&C stock. Karsten cheekpiece. New bolt knob. Glass bedded. Springfield Armory scope I had laying around. Shoots these all day long. (200 yards)
Fast Ed
Here's what I did to mine. Cut and recrowned the factory barrel. Jim See's level 1 accuracy package.
http://www.centershotrifles.com/
B&C stock. Karsten cheekpiece. New bolt knob. Glass bedded. Springfield Armory scope I had laying around. Shoots these all day long. (200 yards)
Fast Ed
Re: i bought a rem 700 sps need help building it
I recently purchased an SPS varmint and swaped the stock out immediately with a McM adjustable HTG. I took it out and shot a few 1/2" or a little better groups. Mine was pretty accurate out of the box with only replacing the stock. I just sent the barreled action to Short Action Customs to have the barrel cut down to 20" and threaded for a suppressor. The stock is on its way to CDI to be inletted for their DBM and the bolt is at AZ Precision getting a varminter knob put on.
It'll all go to Birdsong for their finsh when I get it all back.
I'll post pics when I get it all back and get it to the range.
I recently purchased an SPS varmint and swaped the stock out immediately with a McM adjustable HTG. I took it out and shot a few 1/2" or a little better groups. Mine was pretty accurate out of the box with only replacing the stock. I just sent the barreled action to Short Action Customs to have the barrel cut down to 20" and threaded for a suppressor. The stock is on its way to CDI to be inletted for their DBM and the bolt is at AZ Precision getting a varminter knob put on.
It'll all go to Birdsong for their finsh when I get it all back.
I'll post pics when I get it all back and get it to the range.
Re: i bought a rem 700 sps need help building it
Look around for instructions on how to reduce the trigger weight on your SPS...if you're not comfortable doing it, then find a 'smith. It shouldn't cost but a few dollars.
Then get some ammo and shoot.
Look around for instructions on how to reduce the trigger weight on your SPS...if you're not comfortable doing it, then find a 'smith. It shouldn't cost but a few dollars.
Then get some ammo and shoot.
