I have eight that I was going to use on all of my rifles, but I ended up not using them. These were bought a few years ago and have just been sitting in the box. They are all brand new.
I am asking $175 each. Direct from LaRue, they are $275. It seems they changed the mount slightly and now call it the LT706. These have the 706.
From https://www.larue.com/products/harris-bipod-brm-s-and-lt706-qd-swivel-mount-combo/
Hey all,
After being prodded by some folks, we've attacked the problem of bipods. Here's the result. What we did is designed and machined a new built-in LT mount ... we cannibalize a Harris BRM-S ... merge it all together and VOILA' ... glorious bipod goodness. It tilts left and right, it's lighter by several ounces than the original, it's got our LT-QD stuff on it. It's easy to put on and take off. It's spine is a Harris. It's all good.
Hope it's to your liking, they are already in-the-field. ;-)
ML
Easy tension adjustability, in a lower-profile package.
This product combines the excellent swiveling Harris BRM-S 6"-9" bipod with an integral, low-profile LaRue QD lever mount. We have replaced the Harris OEM stud attachment base with a custom chassis... ruling-out the risk of the stud screw and grabber becoming loose. By doing so, we were able to lower the profile by roughly .25". A large knob on the rear provides easy leverage when adjusting swivel tension, especially when in the prone position. The bipod has 6-9" Legs (with leg notches). The notched legs provide a more positive lockup, keeping legs from collapsing unintentionally.
Our adjustable base attaches to any MIL-1913 picatinny rail. Complete with necessary hardware, tools and Instructions.
I am asking $175 each. Direct from LaRue, they are $275. It seems they changed the mount slightly and now call it the LT706. These have the 706.
From https://www.larue.com/products/harris-bipod-brm-s-and-lt706-qd-swivel-mount-combo/
Hey all,
After being prodded by some folks, we've attacked the problem of bipods. Here's the result. What we did is designed and machined a new built-in LT mount ... we cannibalize a Harris BRM-S ... merge it all together and VOILA' ... glorious bipod goodness. It tilts left and right, it's lighter by several ounces than the original, it's got our LT-QD stuff on it. It's easy to put on and take off. It's spine is a Harris. It's all good.
Hope it's to your liking, they are already in-the-field. ;-)
ML
Easy tension adjustability, in a lower-profile package.
This product combines the excellent swiveling Harris BRM-S 6"-9" bipod with an integral, low-profile LaRue QD lever mount. We have replaced the Harris OEM stud attachment base with a custom chassis... ruling-out the risk of the stud screw and grabber becoming loose. By doing so, we were able to lower the profile by roughly .25". A large knob on the rear provides easy leverage when adjusting swivel tension, especially when in the prone position. The bipod has 6-9" Legs (with leg notches). The notched legs provide a more positive lockup, keeping legs from collapsing unintentionally.
Our adjustable base attaches to any MIL-1913 picatinny rail. Complete with necessary hardware, tools and Instructions.
